Linear BGUS User's Manual | Page 7

Linear Safety Gate User's Manual - BGUS.
Download
Page  of 32
4.8, 1843 votes
background image

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE

-7-

BARRIER GATE ARM INSTALLATION FOR MODEL 

SG/SG-D

1.  Assemble the SG arm on the ground fi rst, making sure 

to leave all fasteners loose, including the spreader 
arms (#4 & #7 above).

2.  Make sure the barrier gate is in the full closed 

position.

3.  With someone’s assistance, lift the arm up to a height 

even with the barrier gate fl ange. The far end should 
either be supported by something of equal height as 
the fl ange, or be held by someone throughout the next 
steps.

4.  Assemble the wood arm between the attachment 

channel (#8) and the fl ange and bolt together. Tighten 
these bolts fi rmly.

5.  Tighten all bolts where the three pieces of wood arm 

come together.

6.  Tighten up the nuts (#6) on the spreader arms (#4 & #7) 

until the plates (#5) are tight against the wood.

7.  The arm should have a curved, wishbone appearance 

once fi nished. 

0.523983s