LG Motorcycle PR200 User's Manual | Page 9

Sometimes the vehicle 

doesn’t run, but other 

times it does

Charger gets warm 

during use

Vehicle does not stop 

when applying the brake 

Vehicle makes loud 

noises or grinding 

sounds

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or cal  tol -free 
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.

Problem 

       Possible Cause 

Solution

Loose wires or connectors

Motor or electrical switch damage

Normal response to charger use

Brake is not adjusted properly

Chain is too dry

Check all wires around the motors and all connectors to make sure 

they are tight.

Contact your local Razor authorized service center for diagnosis and 

repair.

No action required. This is normal for some chargers and is no cause 

for concern. If your charger does not get warm during use, it does not 

mean that it is not working properly.

Refer  to  instructions  on  page  4  of  this  manual  to  properly  adjust 

brake.

Apply a lubricant such as 3 in 1

TM or Tri-FlowTM to the chain.

 TROUBLESHOOTING GUIDE

8