LG Motorcycle PR200 User's Manual | Page 3

Remove contents from box. Remove the foam separators that protect the components from damage during 

shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have 

occurred during shipping. Because the Pocket Rocket was 95 percent assembled and packed at the factory, 

there should not be any problems, even if the box has a few scars or dents.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. 

Allow up to 30 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for initial charge (see page 3 for charging information).

 BEFORE YOU BEGIN

2

      WARNING:

Do not use your Pocket Rocket 

for the fi rst time until you have 

charged the battery for at least 

12 hours. Failure to do so may 

damage your vehicle and void 

your warranty.

DO NOT USE NON-RAZOR 

PRODUCTS WITH YOUR RAZOR

POCKET ROCKET. The Pocket 

POCKET ROCKET

Rocket has been built to certain 

Razor design specifi cations. The 

original equipment supplied at 

the time of sale was selected 

on the basis of its compatibility 

with the frame, fork and all 

other parts. Certain aftermarket 

products may or may not be 

compatible. 

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied 

tools only as a last resort.

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or cal  tol -free 
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.

4mm and 5mm 

hexagonal key wrenches

(included)

Brake Lever

Brake Lever

Adjuster

Wheel

Tire

Back Brake

Adjuster

Speed Control

Drive

Chain 

Charger

Charger 

Plug 

Charger 

Port

Bicycle-style tire pump for 

Schrader valve tires, with 

pressure gauge

Charger Port

Front Fork

On/Off 

Switch

Circuit Breaker

Circuit

Breaker