LG DLE1101W Owner's Manual | Page 7

LG Dryer Owner's Manual - DLE1101W.
Download
Page  of 72
4.3, 2350 votes
background image

7

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

w

WarnInG  

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent 

property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

w

WarnInG  

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

•  Do not, under any circumstances, cut or remove the ground 

prong from the power cord. To prevent injury to persons or 

damage to the dryer, the electrical power cord must be plugged 

into a properly grounded outlet.

•  

For personal safety, this dryer must be properly grounded. 

Failure to do so can result in electric shock or injury.

•  

Refer to the installation instructions in this manual for specific 

electrical requirements for your model. Failure to follow these 

instructions can create an electric shock hazard and/or a fire 

hazard.

•  

This dryer must be plugged into a properly grounded outlet. 

Electric shock can result if the dryer is not properly grounded. 

Have the wall outlet and circuit checked by a qualified 

electrician to make sure the outlet is properly grounded. 

Failure to follow these instructions can create an electric shock 

hazard and/or a fire hazard.

•  The dryer should always be plugged into its own individual 

electrical outlet which has a voltage rating that matches 

the rating plate. This provides sparkling performance and also 

prevents overloading house wiring circuits which could cause a 

fire hazard from overheated wires.

•  Never unplug your dryer by pulling on the power cord. Always 

grip plug firmly and pull straight out from the outlet. The 

power cord can be damaged, resulting in a risk of fire and electric 

shock.

•  Repair or replace immediately all power cords that have 

become frayed or otherwise damaged. Do not use a cord that 

shows cracks or abrasion damage along its length or at either 

end. The power cord can melt, creating an electric shock and/or 

fire hazard.

•  

When installing or moving the dryer, be careful not to pinch, 

crush, or damage the power cord. This will prevent injury and 

prevent damage to the dryer from fire and electric shock.

IMPortant saFEty InstrUCtIons

3828EL2001L_en_120904.indd   7

2012.9.4   11:22:27 AM

 

0.506828s