LG D1484WF Owner's Manual | Page 9

LG Appliances Owner's Manual - D1484WF.
Download
Page  of 36
4.8, 2164 votes
background image

1.  If the end of drain hose does not fit to 

the drain line, use a rubber connector(not 

supplied) that is resistant to heat and 

detergent.

2.  This should be available from a plumbing 

shop or DIY merchants.

3.  There are two typical connections as shown 

in Figure A, B.

The S trap spigot must be drilled out cleanly 

and free of obstruction to its maximum 

internal diameter, if used for drainage.

  When the drain hose is connected to a sink 

S trap or waste disposal unit, the hose must 

be looped up to the underside of the bench 

top and secured.

Drain hose Extension
Extend drain hose as shown below.

Fig. A

  When the drain hose is connected to a 

separate standpipe, it is essential that an 

airtight connection be made. 

Refer to Fig.B

Fig. B : Drainage connection - stand pipe.

9

INSTALLATION INSTRUCTIONS

 Installation of drain hose

• When you connect or extend drain hose, 

make sure that drain hose is not 

kinked. 

(Bends should have a 40 mm radius.) 

CAUTION

Check the waste spigot when initially installing. 

An “OE” error can occur when the waste spigot 

below the sink is not drilled out properly.  

Please ensure the waste spigot connection to this 

drain hose has been completely drilled out before 

connecting and securing.

Connection to Waste spigot 

To prevent siphoning, one of the following 

methods must be used:

Related Manuals for LG D1484WF

0.521489s