KitchenAid KitchenAid KUDD01DPPA User's Manual

KitchenAid Dishwasher User's Manual - KitchenAid KUDD01DPPA.
Download
Page  of 3
4.6, 1473 votes
background image

Undercounter Dishwasher

®

PRODUCT MODEL SERIES

OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

DRAIN OPTIONS

KUDD01DPPA

Electrical: A 120-volt, 60 Hz, AC-only, 15-amp
fused electrical supply is required. (Circuit breaker
or time-delay fuse is recommended.) It is
recommended that a separate circuit serving only
this appliance be provided. 

The 3 prong grounded outlet must be installed
within 6" (15.2 cm) to 18" (45.7 cm) of the cabinet
side wall.

If you plan to install a garbage disposer, an
additional separate 120-volt, 60 Hz, AC-only, 
15- or 20-amp fused electrical supply is required. 

Water: A hot water line with 4.3-145 psi 
(30-1000 kPa) water pressure must be used.
Water temperature must be minimum 120°F
(49°C) at dishwasher. An easily accessible valve
with 3/8" compression fitting must be installed in
the hot water supply line.

Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. 8546448

12-2-04

23-7/16"

(59.5 cm)

22-7/16" *

(57 cm)

2"– 4-3/8" **

(5 cm – 11 cm)

32-3/16"- 34-1/2" 

(81.8 cm - 87.8 cm)  

side

attaching

tabs

raised tabs for

optional top

attaching brackets

30" ***

(76.2 cm)  

20-15/32" 

(52 cm)  

drawer open

* If custom wood panels are to be used,

the product depth is specified with an
11/16" (18 mm) door panel thickness.

** Toe panel depth: Factory supplied,

2– 4-3/8" (5 – 11 cm); Custom wood,
5" (12.7 cm) less the toe panel
thickness for integrated. Minimum
panel thickness using the supplied
screws is 3/8" (9 mm).

*** Door front height: Factory supplied –

30" (76.2 cm); Custom wood – 28-1/4" 
(71.8 cm) minimum.

NOTE: Product shown with front panels
for dimension purposes.

4" 

(10 cm)

moisture protection tape

Utility hole:

1-1/2" (3.8 cm) dia.

hole, either side –

immediately adjacent

to corner.

22-7/8"

(58.0 cm)

23-5/8"* (60.0 cm)

32-5/16"– 34-5/8" 

(82.0 cm – 88.0 cm)  

*IMPORTANT: Custom wood door panels, if
used, may be wider than the dishwasher to
match surrounding cabinets. The 23-5/8"
(60.0 cm) must be increased so that there is
a 1/4" (6.4 mm) clearance between the
cabinet side and panel edge.

For corner installation, there must be a 1/2" 
(12.7 mm) space between the adjacent
cabinet doors (i.e. door knobs) and open
dishwasher drawer.

drain hose
support

water supply

waste

waste tee

27-1/2" – 32-1/4"

(70 cm – 82 cm)

waste

garbage
disposal

valve

water supply

8" (20.3 cm) min. bend

radius from valve

27-1/2" – 32-1/4"

(70 cm – 82 cm)

6" (15.2 cm)
minimum

drain hose
support

waste

valve

air break

drain hose
connector

water supply

8" (20.3 cm) min. bend

radius from valve

Sink drain waste
tee connection

Garbage disposal
connection

Air break connection

0.585244s