Keurig OfficePRO Premier - B155 Owner's Manual | Page 7

 7.

 There may be a short pause prior to coffee 

being dispensed. The entire brew process 
lasts for approximately 1 minute and ends 
with a burst of air to remove all liquid from 
the K-Cup® pack.
CAUTION: There is extremely hot water in 

the K-Cup® Pack Holder during the brew 

process. To avoid risk of injury, do not lift the 

Handle or open the K-Cup® Pack Assembly 

Housing during the brew process.

 8.

 The end of brew is indicated by “KEURIG 

BREWED ENJOY”. 

 9.

 Lift the Handle, remove and dispose 

of the used K-Cup® pack.

CAUTION: K-Cup® pack will be hot.

10.

  Enjoy your first cup of Keurig Brewed® 

gourmet coffee, tea or hot cocoa!

11.

  Your Brewer may display “HEATING 

PLEASE WAIT” as it heats water for the 
next brew cycle. 

Ready to Brew Your First Cup

1. 

 The LCD Display will be in its idle state (fig. 4).

2. 

 Lift the Handle. The K-Cup® Pack Holder 

 will open toward you (fig. 5).

3.  

Select a K-Cup® pack.

NOTE: Do not remove the foil lid 

or puncture the K-Cup® pack.

4.  

Place a K-Cup® pack in the 

K-Cup® Pack holder (fig. 6).
CAUTION: There are two sharp needles that

puncture the K-Cup®pack, one above the K-Cup® 

Pack Holder and the other in the bottom of the 

K-Cup® Pack Holder. To avoid risk of injury, do 

not put your fingers in the K-Cup® Pack Assembly 

Housing.

5.   

Lower the Handle to close the Lid over the

K-Cup® Pack Holder. (When it is closed com-
pletely, the BREW Button will flash up to 
60 seconds.)

6.  

Place a mug on the drip tray and select 

your brew size (fig. 7), then press BREW (fig. 8).
NOTE: If you do not press BREW within 60 

seconds the Brewer will return to its idle state 

and the Brew Button will cease to flash to prevent 

accidental activation. Re-activate by raising the 

handle fully and then closing it.

fi g. 

4

fi g. 

6

fi g. 

5

fi g. 

7

7

Select 
Brew Size

8 OZ.

4 OZ.

6 OZ.

10 OZ.

fi g. 

8

12:30 PM

Ready

Choose Your 
K-Cup® 
Portion Pack 
& Lift Handle

WATER 

LEVEL

Español

Français