Keurig K75 Platinum Brewer User Guide | Page 8

Keurig Brewers User Guide - K75 Platinum Brewer.
Download
Page  of 20
4.1, 1140 votes
background image

8

9

  c.

  Once the brew size is chosen, press the 

BREW Button. The BREW Button will stop 
flashing and the Left and Right Buttons will 
no longer be illuminated. 

 7.

  The LCD Control Center will indicate 
“BREWING” and the selected brew size icon 

will be lit (fig. 8). CAUTION: There is extremely 
hot water in the K-Cup® Pack Holder during the 
brew process. To avoid risk of injury, do not lift 
the Handle or open the K-Cup® Pack Assembly 
Housing during the brew process.

 8.

  There may be a short pause prior to beverage 

being dispensed. The entire brew process 
lasts for approximately 1 minute and ends 
with a burst of air to remove all liquid from 
the K-Cup® pack.

 9.

  Lift the Handle and 

dispose of the used 
K-Cup® pack. 

CAUTION: K-Cup® 
pack will be hot.

 10.

 Enjoy your first cup 

of Keurig Brewed® 
gourmet coffee, tea 
or hot cocoa!

 11.

 The LCD Control Center may indicate “NOT READY” as the brewer 

heats water for the next brew cycle. “READY TO BREW” will be 
indicated after about 15 seconds. 

Stopping the Brew Process

If you need to stop the brewing after the process has started, press and 
release the Power Switch to turn the brewer “OFF.” The flow of coffee, tea 

or hot cocoa will stop, the heating element will shut off and the LCD Control 

Center and the blue light in the Water Reservoir will no longer be illuminated. 
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next 
brew. We recommend that you perform a cleansing brew after a terminated 
brew. Then your NEXT brew will be the volume you have selected.

adding Water

The LCD Control Center will indicate “ADD 

WATER” when the level in the Water Reservoir 
is low or if the Water Reservoir has been removed 
(fig. 9). The blue light in the Water Reservoir will 
also blink when water needs to be added. The 
brewer will not allow you to brew when “ADD 
WATER” is indicated (fig. 9). 

SECTION 1

Set-Up & First Brew (continued)

fig. 

8

fig. 

9

P8 201309003   KER755_K70-75.pdf   1C( K)   ZB2319   2013.09.06

0.590537s