Keurig K-45 Elite Brewer User Guide | Page 7

Keurig Brewers User Guide - K-45 Elite Brewer.
Download
Page  of 16
4.7, 1955 votes
background image

ready to Brew Your First cup

  1. The green Power Light will illuminate to 

indicate the brewer is powered on.

 2.

  Place a cup or mug on the Drip Tray Plate.

 3.

  Lift the Handle and the K-Cup® Pack Holder 

will open toward you (fig. 4).

 4.

  Select a K-Cup® pack. 

NOTE: Do not remove the 
foil lid or puncture the 
K-Cup® pack.

 5. 

Place a K-Cup® pack in the 
K-Cup® Pack Holder (fig. 5). 
CAUTION: There are two sharp needles 
that puncture the K-Cup® pack, one above 
the K-Cup® Pack Holder and the other in the

NOTE:

 You may see small amounts of water coming from the Vent and dripping 

into the Water Reservoir during this and subsequent heating – this is normal.

 8.

  Lift and lower the Handle. Press the Small Mug Button to start a 

cleansing brew (fig. 3). Pour the hot water into the sink.

 9.

  The brewer may take 15 seconds to reheat water between brews during 

which time the red Heating Light may be illuminated. When the water has 
heated, the red Heating Light will turn off.

 10.

 The one-time set-up process is now complete and you are ready to brew!

 

bottom of the K-Cup® Pack Holder. To avoid risk 

 

of injury, do not put your fingers in the K-Cup® 

 

Pack Holder.

 6. 

Lower the Handle completely to close the Lid.

 7. 

Select your brew size: The Small Cup choice will 
yield a 5.25 oz. serving, the Small Mug will yield a 
7.25 oz. serving and the Large Mug will yield a 
9.25 oz. serving. NOTE: If you do not push a Brew 
Button in 60 seconds, the Brew Buttons will be disabled 
to prevent accidental activation. Re-activate the Brew 
Buttons by lifting and lowering the Handle completely.

 8.

  The blue Brew Button you choose will remain 

illuminated while brewing. CAUTION: There is 
extremely hot water in the K-Cup® Pack Holder during 
the brew process. To avoid risk of injury, do not lift the 
Handle or open the K-Cup® Pack Assembly Housing 
during the brew process.

 9.

  There may be a short pause before the brewing 

process begins. The entire brew process lasts for 
approximately 1 minute and ends with a burst of air 
to remove all liquid from the K-Cup® pack.

 10.

 Lift the Handle and dispose of the used K-Cup® 

pack. CAUTION: K-Cup® pack will be hot.

11.

 Enjoy your first cup of Keurig Brewed® 

gourmet coffee, tea or hot cocoa!

fig. 

5

fig. 

4

7

0.572764s