Keurig K-10 Mini Plus Brewer User Guide | Page 5

Keurig Brewers User Guide - K-10 Mini Plus Brewer.
Download
Page  of 11
4.6, 1622 votes
background image

8

9

SeCtIon 4  Set-Up & Operation 

CAUTION: Two sharp needles are used to puncture the 
K-Cup® packs. One is above the K-Cup® Pack Holder and 
the other is in the bottom of the K-Cup® Pack Holder. To 
avoid risk of injury, do not put your fingers inside the 
K-Cup® Pack Assembly Housing.

CAUTION: During the brewing process, the water 
gets extremely hot. To avoid risk of injury, do not 
lift the Handle or open the K-Cup® Pack Assembly 
Housing until brewing is complete.

Plug the Power Cord into an 
independent, grounded outlet.

Remove all tape and cardboard.

Perform an initial cleansing 
brew before making your 
first beverage. Follow these 
instructions but do not insert 
a K-Cup® pack.

Press the Power Button. The Add Water Indicator 
will flash blue.
    The Power Button does not illuminate. 

Lift the Cold Water Reservoir Lid.

MAX 
10 oz.

8 oz.

6 oz. 
Min

1

2

Pour water anywhere within the Cold Water 
Reservoir until it reaches up to the rim of your 
desired fill level on the Water Level Guide 
(minimum of 6 oz.). Lower the lid.
    For accurate measuring, do not fill if the 
    Handle is up. 

  Bottled or filtered water is recommended; 
    distilled or reverse osmosis water is not. 

3

4

Initial Cleansing & First Brew

8

BREW

For accurate measuring, do not fill if the 
Handle is up. In the down position it prevents 
water from entering the lower heating 
compartment.

0.572823s