Keurig Elite Owner's Manual | Page 10

Keurig Coffee Makers Owner's Manual - Elite .
Download
Page  of 16
4.5, 1331 votes
background image

SECTION 2

 

Controls & Indicators (LED Control Center)

Programming auto off Timer Feature

Set the brewer to turn off two hours after the last brew.

 1.

  Press the Power Button to turn on the brewer.

 2.

  Press the black Auto Off Button to turn on the 

Auto Off Timer feature (fig. 7). The green Auto 

Off Light will illuminate. 

    When the Auto Off Timer is enabled, your 

brewer will automatically turn off two hours 
after your last brew.

 3.

  To disable the Auto Off Timer, simply press the 

black Auto Off Button again and the green Auto 
Off Light will turn off. 

cleaning external Parts

Regular cleaning of the brewer’s external components is recommended.

 1.

  Never immerse the brewer in water or other liquids. The Housing and other 

external components may be cleaned with a soapy, damp, non-abrasive cloth.

 2.

  The Drip Tray can accumulate up to 8 oz. of overflow. The Drip Tray and 

Drip Tray Plate should be periodically inspected and rinsed clean. To 
remove the Drip Tray Assembly, simply slide it toward you, keeping it level 
at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not 
be placed in the dishwasher. They should be cleaned with a damp, soapy, 
non-abrasive cloth and rinsed thoroughly.

cleaning the K-cup® Pack holder assembly

  1.  Cleaning the Parts —

The K-Cup® Pack Holder 

Assembly can be placed onto the top shelf of a 
dishwasher. NOTE: Use low temperature cycles in 

the dishwasher. 

To remove from the brewer, lift the 

Handle and grasp the top of the K-Cup® Pack 
Holder with one hand while pushing up on the 
bottom of the K-Cup® Pack Holder from 
underneath with the other until it releases 
(fig. 8). After cleaning, align the K-Cup® Pack 
Holder with the opening using the two front ribs 
as a guide and snap into place from the top. 

SECTION 3

 

Cleaning & Maintenance

fig. 

8

fig. 

7

10

0.478251s