Keurig Coffeemaker TRUE User's Manual

Keurig Coffee Makers User's Manual - Coffeemaker TRUE.
Download
Page  of 1
4.9, 1541 votes
background image

Keurig

® Brewer De-Scaling Instructions

Brewer Model: Elite B40 | Classic B44
Special Edition B60 | Platinum B70

To begin, you will need the following:
• 48 ounces of undiluted white vinegar
• Large ceramic mug (do not use a paper cup)
• Access to an empty sink

PREPARE
Step 1: Empty the water in the Water Reservoir.
Step 2: Disable “Auto Off” features.

FILL AND CLEAN
Step 1: Pour approximately 48 ounces of the vinegar 
 

 

into the Water Reservoir.

Step 2: Place a large mug on the Drip Tray Plate and 
 

 

run a brew cycle. DO NOT USE A K-CUP, just 

 

 

press the BREW Button. Pour the contents of 

 

 

the large mug into the sink.

Step 3: Repeat the brew process without a K-Cup until 
 

 

“ADD WATER” is indicated.

Step 4: Now let the Brewer stand for at least 4 hours 
 

 

while still on.

Step 5: Discard any residual vinegar and rinse the 
 

 

Water Reservoir thoroughly.

RINSE
Step 1: Ensure the Water Reservoir is filled with fresh 
   water.
Step 2: Place a large mug on the Drip Tray Plate and 
 

 

water brew cycle. Pour the contents of the 

 

 

large mug into the sink.

Step 3: Repeat brew process until “ADD WATER” is 
   indicated.
Step 4: You may need to perform additional water brew 
 

 

cycles if you notice any residual taste.

NOTE:  If “DE-SCALE” is still displayed after
 

 

completing the procedure, repeat the

 

 

de-scaling procedure above.

Brewer Model: MINI Plus B31

© 2011 Keurig, Incorporated All Rights Reserved.

To begin, you will need the following:
• 20 oz. of undiluted white vinegar
• 12 oz. ceramic mug (do not use a paper cup)
• Access to an empty sink

FILL, CLEAN AND RINSE
Step 1: First Vinegar Rinse
 

• Fill the Cold Water Reservoir with 10 oz. of undiluted 

  

white 

vinegar.

 

• Place the ceramic mug on the Drip Tray.

 

• Lift the Brewer Handle, but DO NOT ADD A K-CUP.

 

• After 5 seconds, lower the Brewer Handle.

 

• Press the flashing blue BREW Button. It will flash 

 

  red and then turn solid red.

 

• Once the vinegar is dispensed, discard hot contents 

  

into 

sink.

Step 2: Second Vinegar Rinse
 

• Pour the remaining 10 oz. of vinegar into the Cold 

  

Water 

Reservoir.

 

• Place the ceramic mug on the Drip Tray.

 

• Lift the Brewer Handle, but DO NOT ADD A K-CUP.

 

• After 5 seconds, lower the Brewer Handle.

 

• Press the flashing blue BREW Button. It will then 

  

flash 

red.

 

• When it turns solid red, power off as it starts to 

  

dispense.

 

• Allow Brewer to sit for 30 minutes.

 

• Power on the Brewer, lift and lower Brewer Handle, 

 

  then press BREW Button.

 

• Once the vinegar is dispensed, discard hot contents 

  

into 

sink.

Step 3: Fresh Water Rinse
 

• Fill the Cold Water Reservoir with 10 oz. of fresh 

  

water.

 

• Place the ceramic mug on the Drip Tray.

 

• Lift the Brewer Handle, but DO NOT ADD A K-CUP.

 

• Lower Brewer Handle and continue the brewing 

 

  process until the hot water is dispensed into the 

 

  mug. Discard hot contents into sink.

 

• Repeat this cleansing brew process three (3) more 

 

  times to cleanse the Brewer plumbing and to 

 

  remove any residual vinegar taste. The Brewer is 

 

  now ready for normal use again.

0.578390s