Keurig Breville Owner's Manual | Page 9

Keurig Coffee Makers Owner's Manual - Breville .
Download
Page  of 39
4.5, 1859 votes
background image

16

17

OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™

NOTE: 
There are two sharp needles used 
to puncture the K-Cup® and My 
K-Cup® holder. One in the base of 
the K-Cup® holder, the other on the 
underside of the Brewing Chamber 
head. To avoid risk of injury, use 
caution when inserting or removing 
the K-Cup®, K-Cup® holder or My 
K-Cup® holder.

Lower the Safety Locking Arm to close 

11. 

the Brewing Chamber Head over the 
My K-Cup® Holder. When closed 
completely, the LCD screen will indicate 
‘READY TO BREW’. The      and 
buttons will illuminate and the ‘BREW’ 
button will illuminate and flash for up to 
60 seconds.

a)  The LCD screen will indicate the 

default brew size (7.25 oz.). To 
choose a different size, press the    
to go up in size or the      button to 
go down in size.

NOTE: 
Select from a stronger small cup 
(5.25 oz. serving), a small mug (7.25 
oz. serving), a large mug (9.25 oz. 
serving), a travel mug (11.25 oz. 
serving) or iced beverage setting 
(3.25oz serving). The iced beverage 
setting is only available on the the 
BKC700XL.
The small mug (7.25 oz. serving) is 
the default brew size. 
To program your favorite brew size, 
refer to Setting the ‘BREw SIZE’ 
feature (page 24).

NOTE: 
To use the iced beverage setting, 
place a tall glass filled with ice on 
the drip tray. Use your favorite  
K-Cup®, select the iced beverage 
brew size button. Add more ice once 
brewing is complete, add cream and 
sugar if desired. The iced beverage 
setting is only available on the 
BKC700XL.

b) Once the brew size is selected, 

press the ‘BREW’ Button. The 
‘BREW’ button will stop flashing,  
the      and      buttons will no longer 
be lit. The LCD screen will indicate 
‘BREWING’ and the selected  
brew size. 

NOTE: 
There is extremely hot water in 
the My K-Cup® holder during the 
brewing process. To avoid risk 
of injury, do not raise the Safety 
Locking Arm or open the Brewing 
Chamber during the brewing 
process.

Following the brew, the LCD screen 
will indicate ‘hEATING’ as the 
Brewer heats the water for the next 
brew cycle. This process lasts about 
15 seconds. The pump will make a 
vibrating sound. This is normal.

Raise the Safety Locking Arm, remove 

13. 

the assembled My K-Cup® Holder. Use 
caution as the My K-Cup® Holder will 
be hot.

Disassemble the My K-Cup

14. 

® Holder by 

removing the Lid from the Holder in a 
counter-clockwise direction. Remove 
the Filter Basket from the Holder, 
discard the grounds and rinse out the 
Filter Basket and Holder.

15. Enjoy your first cup of gourmet 

15. 

coffee, tea or hot cocoa!

NOTE: 
If the ‘BREw’ button is not pressed 
in 60 seconds, the LCD screen 
will indicate ‘OpEN hEAD’ and the 
‘BREw’ button will be disabled to 
prevent accidental activation. To 
re-activate the brew sequence, 
open the Brewing Chamber head 
by raising and lowering the Safety 
Locking Arm completely.

The LCD screen will indicate 

12. 

‘BREWING’, however there may be a 
short pause before the brewing process 
begins. The process lasts about 60 
seconds and ends with a burst of air to 
remove all liquid from the My K-Cup® 
Holder.

OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™

0.509234s