Keurig Breville Owner's Manual | Page 8

Keurig Coffee Makers Owner's Manual - Breville .
Download
Page  of 39
4.5, 1859 votes
background image

14

15

BREwING wITh ThE MY K-CUp® 
ACCESSORY
The Breville Gourmet Single Cup Brewer™ 
comes with a My K-Cup® accessory. The 
dishwasher safe, reusable My K-Cup® 
allows you to use your own grind of coffee 
so you can adjust the amount and type of 
coffee to suit your tastes. Along with the 
included measuring scoop, this accessory 
conveniently stores in the easy open 
compartment on top of the brewer.

Follow the instructions, Installing the 

1. 

Water Filter (page 9) and the One-time 
Priming Process (page 10). The Brewer 
should be turned on and the Water Tank 
should be filled and illuminated.

NOTE: 
Do not use water that has been 
treated by a 'water softener'. The 
increase in sodium levels in the 
water can cause scaling in the 
brewer and hinder its performance.

The LCD screen will indicate ‘READY  

2. 

TO BREW’.

NOTE: 
If the ‘BREw’ button is not pressed 
in 60 seconds, the LCD screen 
will indicate ‘OpEN hEAD’ and the 
‘BREw’ button will be disabled to 
prevent accidental activation. To 
re-activate the brew sequence, 
open the Brewing Chamber head 
by raising and lowering the Safety 
Locking Arm completely.

Place a cup or mug on the Drip Tray 

3. 

Plate. The drip tray plate and drip tray 
can be removed to accomodate taller 
mugs and travel mugs.

NOTE: 
There is extremely hot water in the 
K-Cup® holder during the brewing 
process. To avoid risk of injury, do 
not raise the Safety Locking Arm or 
open the Brewing Chamber during 
the brewing process.
Following the brew, the LCD screen 
will indicate ‘hEATING’ as the 
Brewer heats the water for the next 
brew cycle. This process lasts about 
15 seconds. The pump will make a 
vibrating sound. This is normal.

Raise the Safety Locking Arm, remove 

9. 

and dispose of the used K-Cup®. Use 
caution as the K-Cup® will be hot.

Enjoy your first cup of gourmet coffee, 

10. 

tea or hot cocoa!

The LCD screen will indicate ‘READY 

11. 

TO BREW’, indicating that the next 
K-Cup® can be inserted for the next 
brew cycle.

OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™

OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™

Open the storage compartment located 

4. 

on top of the Brewer by pressing the 
finger indent on the right side. Remove 
the My K-Cup® accessory.

Disassemble the My K-Cup

5. 

® accessory 

by removing the Lid from the Holder in a 
counterclockwise direction. Remove the 
Filter Basket from the Holder.

Wash the My K-Cup

6. 

® Lid, Filter Basket 

and Holder in warm soapy water prior to 
first use. Rinse and dry thoroughly.

Insert the Filter Basket into the Holder.

7. 

Use the My K-Cup

8. 

® Measuring Scoop 

to fill the Filter Basket with 1 level scoop 
maximum of coffee. 1 level scoop is 
equivalent to 2 tablespoons. Alternatively, 
there are line markings on the inside 
of the Filter Basket that indicate 1 
tablespoon and 2 tablespoons so you 
can adjust the amount of coffee to your 
personal preference. Do not fill the Filter 
Basket with more than one level scoop 
of coffee or tamp the grinds. Ensure the 
coffee remains loose and there are no 
coffee grinds remaining on the upper  
rim of the Filter Basket. Screw on the  
Lid to seal.

NOTE: 
1 level scoop = 2 tablespoons
we recommend this for the small 
mug 7.25 oz. serving.
Or, if you like a stronger brew, select 
the small cup 5.25 oz. serving.
If you grind your own beans:

1. Start with a coarser grind similar 

to a French press grind.

2. Experiment with grinds similar to 

drip brewing grinds.

3. Avoid a fine espresso grind 

setting that could clog the 
Filter Basket or result in poor 
extraction.

Raise the Safety Locking Arm. The 

9. 

Brewing chamber will open toward you.

Place the assembled My K-Cup

10. 

® 

Holder into the Brewing Chamber.  
To do this:

a) Remove the K-Cup® Holder from the 

Brewing Chamber (10a). Store the 
K-Cup® Holder in the My K-Cup® 
Storage compartment located on 
top of the Brewer.

b) Insert the assembled My K-Cup® 

Holder into the Brewing Chamber 
(10b), ensuring to align the      arrow  
on the My K-Cup® Lid with the 
arrow in the Brewing Chamber.

0.491574s