Keurig Breville Owner's Manual | Page 5

Keurig Coffee Makers Owner's Manual - Breville .
Download
Page  of 39
4.5, 1859 votes
background image

8

9

OpERATING
your new Breville Gourmet Single Cup Brewer™

OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™

INSTALLING ThE wATER FILTER
For the best tasting gourmet coffee, tea 
or hot cocoa, Breville recommends using 
bottled or filtered water.

The Water Filter provided with the Brewer 
can significantly reduce substances that 
affect the smell and taste of water such as 
free chlorine, certain pesticides and organic 
impurities as well as traces of heavy metals.

NOTE: 
The water Filter can be removed 
from the Brewer.
If you choose to install the water 
Filter, it is recommended to replace 
the Charcoal Filter every 2 months 
or 60 tank refills, more often if you 
have hard water.
we recommend removing the water 
Filter if using filtered water, or if you 
choose not to replace the Charcoal 
Filter every 2 months, as the filter 
may clog and affect the smell and 
taste of the water.
If you choose not to install the water 
Filter, you are ready to start the  
One-time priming process (page 10).

NOTE: 
Do not use water that has been 
treated by a 'water softener'. The 
increase in sodium levels in the 
water can cause scaling in the 
brewer and hinder its performance.

Follow these steps each time you install 
a new Charcoal Filter to ensure it filters 
optimally.

Remove the Water Tank from the Brewer 

1. 

by gripping the handle located on the left 
side of the Water Tank, then lift upwards.

Remove the Water Tank Lid.

2. 

Rinse the Water Tank with fresh water 

3. 

and replace back onto the Brewer.

Remove the Upper and Lower Filter 

4. 

Holder and Charcoal Filter from the 
polybag. Unwrap the Charcoal Filter from 
its protective plastic.

Soak the Charcoal Filter for 5 minutes 

5. 

then rinse for 30 seconds. It is normal to 
see a grey residue after soaking the filter.

Wash the Lower Filter Holder, ensuring 

6. 

the stainless steel mesh is free of residue.

Insert the Charcoal Filter into the Upper 

7. 

Filter Holder, then attach the Lower Filter 
Holder so it locks into place.

0.467616s