Kenwood VR-409 Owner's Manual | Page 37

Kenwood Appliances Owner's Manual - VR-409.
Download
Page  of 42
4.8, 1764 votes
background image

37

Remote Control

Press the key of the same operation that you want to store.

• The remote code is send to the remote control unit.
• "Complete" appears when finished.

• When it takes for more than 8 seconds or the remote control unit does

not receive the remote control code well, "Error" appears in the
display. In this case, re-operate from the step 

1.

• "Full" appears when the memory is full. Re-operate from the step

1 after deleting some memories.

The remote control code is stored on the memory (Extend1 –

Extend5) of the remote control unit.

To operate other components by using the stored memory

Press the [Menu] key .

• The Menu display appears.

Press the 5/ keys to select the memory you want to operate.

Press the [Enter] key.

To delete the stored memory

Press the [Clr] key in step 

5. "Cleared" appears in the display

and the memory that is selected in step 

4 is erased.

Press the MUSIC, MOVIE, or TV key to select desired input

source.

You can restore the setup codes or memories to their original default
settings.

• "Cleared" appears in the display, and the remote settings return to

their original default settings.

Getting the most from your remote control

5

+

+

TUNING

BAND

ENTER

Insert the batteries during pressing and holding the [

5]

keys and [      ] key.

2

1

Restoring the original factory settings

Press the 5/ keys to select the location.

• Extend1 – Extend5 are available.

Press the [Enter] key.

• The remote control is ready for receiving the remote control code.

>Extend1

Waiting

Clr  Exit

>Extend1

>Extend1

Complete

Extend 1

Related Manuals for Kenwood VR-409

0.481860s