Kenwood VR-409 Owner's Manual | Page 2

Kenwood Appliances Owner's Manual - VR-409.
Download
Page  of 42
4.8, 1764 votes
background image

2

Preparations

Units are designed for operation as follows.

U.S.A. and Canada ........................................... AC 120 V only
Australia ........................................................... AC 240 V only
China and Russia ............................................ AC 220 V only
*Other countries ........... AC 110-120 / 220-240 V switchable

WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS IN-
SIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF UNINSULATED “DAN-
GEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE
THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTI-
TUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Unpack the unit carefully and make sure that all accessories are put
aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is
damaged or fails to operate, notify your dealer immediately. If your unit
was shipped to you directly, notify the shipping company without delay.
Only the consignee (the person or company receiving the unit) can file
a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materi-
als for use should you transport or ship the unit in the future.

Keep this manual handy for future reference.

Before applying the power

Caution : Read this page carefully to ensure safe

operation.

Safety precautions

Unpacking

Accessories

FM indoor antenna (1)

AM loop antenna (1)

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-
ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-
ENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-
PANYING THE APPLIANCE.

Remote control unit (1)

Note:
Our warranty does not cover damage caused by excessive line voltage
due to improper setting of the AC voltage selector switch.

* AC voltage selection

Move switch lever to
match your line voltage
with a small screw-
driver or other pointed
tool.

AC voltage selector switch

The AC voltage selector switch on the rear panel is set to the voltage that
prevails in the area to which the unit is shipped.  Before connecting the
power cord to your AC outlet, make sure that the setting position of this
switch matches your line voltage.  If not, it must be set to your voltage
in accordance with the following direction.

*AC plug adaptor (1)

*Use to adapt the plug on the power

cord to the shape of the wall outlet.
(Accessory only for regions where use
is necessary.)

Batteries (R6/AA) (4)

AC 110 – 120V ~

AC 220 – 240V ~

AC 110 - 
120V

AC 220 - 
240V

Related Manuals for Kenwood VR-409

0.472826s