Kenwood KAC-528 Owner's Manual | Page 9
9
Installation
• Since the power amplifier has no parts which require operation, it can be installed at a position
away from the driver’s seat without any hindrances.
As generally accepted positions for its installation, places such as inside the trunk, etc. can be
considered.
• Use the extension cables. (Optional.)
• Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be
damaged.
• Install this unit in a location which allows heat to easily dissipate.
Once installed, do not place any object on top of the unit.
• The surface temperature of the amplifier will become hot during use. Install the amplifier in a
place where people, resins, and other substances that are sensitive to heat will not come into
contact with it.
• When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check
that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe, or
wiring harness, and be careful not to cause scratches or other damage.
• Do not install near the dashboard, rear tray, or air bag safety parts.
• The installation to the vehicle should securely fasten the unit to a place in which it will not
obstruct driving. If the unit comes off due to a shock and hits a person or safety part, it may
cause injury or an accident.
• After installing the unit, check to make sure that electrical equipment such as the brake lamps,
turn signal lamps and windshield wipers operate normally.
2CAUTION
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,
Installation board, etc.
(thickness : 15 mm or more)
Self-tapping screw
(ø4
× 16 mm)
CA-2SL
CA-12SL
CA-22SL
CA-52SL
RCA cable
CA-3WL
CA-13WL
CA-23WL
CA-53WL
RCA cable (ø7mm)
CA-5W
CA-15W
CA-25W
CA-45W
CA-65W
RCA cable (ø12mm)
0.5m
1m
2m
4m
5m
6m
Type
Length
Model
KAC-728
KAC-628
KAC-528
Maximum Current
Drawn
28 A
19 A
16 A
Protective Fuse
50 A
× 1 [25 A × 2]
30 A
× 1
25 A
× 1
Cross-sectional Area of Wiring
Cable (AWG)
5 mm2 (AWG 10) or greater
× 1
3 mm2 (AWG 12) or greater
× 1
3 mm
2 (AWG 12) or greater
× 1
Example: One Power Amplifier Is Used
50 A
25 A
25 A
25 A
25 A
Related Manuals for Kenwood KAC-528
-
Bose Audio SoundDock Series II system Owner's Manual
12 pages
-
Bose Audio SoundLink Mini Bluetooth speaker Owner's Manual
33 pages
-
Bose Audio SoundLink Bluetooth Mobile speaker II Owner's Manual
24 pages
-
Bose Audio Bose Solo TV Sound System Owner's Manual
23 pages
-
Bose Audio 301 Series V speakers Owner's Manual
10 pages
-
Bose Audio Wave music system III Owner's Manual
28 pages
-
Logitech Audio S-00078 Quick Start Manual
86 pages
-
Onkyo Audio HT-R530 Owner's Manual
71 pages
-
Pioneer Audio AVH-X2500BT Owner's Manual
212 pages
-
Technics Audio SL-1200MK2 Owner's Manual
12 pages
-
RCA Audio RT2770 Owner's Manual
2 pages
-
Alpine Audio CDE-143BT Owner's Manual
47 pages
-
Line 6 Audio Spider IV 75 Owner's Manual
33 pages
-
Behringer Audio Xenyx 802 Owner's Manual
12 pages
-
Behringer Audio Xenyx Q802USB Owner's Manual
12 pages
-
Behringer Audio Xenyx QX2442USB Owner's Manual
26 pages
-
Markbass Audio CMD 102P Owner's Manual
8 pages
-
Apple Audio iPod nano (7th generation) Owner's Manual
68 pages
-
Apple Audio iPod nano (5th generation) Owner's Manual
104 pages
-
Apple Audio iPod nano (4th generation) Owner's Manual
80 pages
-
Apple Audio iPod nano (3rd generation) Owner's Manual
72 pages
-
Apple Audio iPod nano (2nd generation) Owner's Manual
60 pages
-
Ford Audio 6000cd User's Manual
60 pages
-
QSC Audio USA 850 Owner's Manual
8 pages