Kenmore Kenmore 5.9 cu. ft. Flat-Back Gas Dryer w/ SmartDry - White Owner's Manual | Page 8

Kenmore Dryer Owner's Manual - Kenmore 5.9 cu. ft. Flat-Back Gas Dryer w/ SmartDry - White.
Download
Page  of 40
4.6, 1747 votes
background image

8

6.  Press and hold PUSH to START 

to begin cycle 

Press and hold the PUSH to START button to begin the cycle.
Promptly remove garments after cycle has completed to  

reduce wrinkling. Use the Wrinkle Guard™ option to avoid 

wrinkling when you are unable to remove a load from the  

dryer as soon as it stops.

4. Set cycle options (on some models)

Select the cycle options by turning the knob to the desired  

position. 
NOTE: Not all options and settings are available with all cycles.
Wrinkle Guard™ option
n

Get up to 40 minutes of heat-free, periodic tumbling at the 

end of a cycle. Turn the WRINKLE GUARD™ knob to select 

ON or OFF at any time before the cycle has ended.

Dry Temp
Turn the DRY TEMP knob to change the drying temperature  

setting. See “Setting the Drying Temperature.” 

3. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide”  

for more information about each cycle.
Auto Moisture Sensing™/Auto Dry cycles 

You can select a different dry level, depending on your load,  

by turning the knob to More, Normal, or Less. 
Selecting More, Normal, or Less automatically adjusts the  

dryness level at which the dryer will shut off. Once a dry level  

is set, it cannot be changed without stopping the cycle.
Auto Moisture Sensing™/Auto Dry cycles give the best drying in 

the shortest time. Drying time varies based on fabric type, load 

size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is 

used for a starting point for Auto Moisture Sensing™/Auto Dry 

cycles. Choose normal to save energy. Less Dry removes less 

moisture and used for loads you may want to put on a hanger 

to complete drying. 

5. Select Cycle Signal, if desired  

 

(on some models)

Turn the CYCLE SIGNAL knob to select the desired setting (On 

or Off). The Cycle Signal produces an audible sound when the 

drying cycle is finished. Promptly removing clothes at the end  

of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and the 

Cycle Signal is on, the tone will sound every 5 minutes until the 

clothes are removed, or the Wrinkle Guard™ option ends.

or

0.568580s