JVC JCV Micro HiFi System 0910TMMMDWMTS User's Manual

JVC Portable CD Player User's Manual - JCV Micro HiFi System 0910TMMMDWMTS.
Download
Page  of 2
4.8, 2397 votes
background image

ID3 ON

ID3 OFF

CAUTIONProper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, 
locate the apparatus as follows:

Front: No obstructions and open spacing.
Sides/Top/Back: No obstructions should be placed in the 
areas indicated by the dimensions in the illustration.
Bottom: Place on the level surface. Maintain an adequate air 
path for ventilation by placing on a stand with a height of 
10 cm or more.

ATTENTION: Aération correcte
Pour prévenir tout risque de décharge électrique ou d’incendie 
et éviter toute détérioration, installez l’appareil de la manière 
suivante:

Avant: Bien dégagé de tout objet.
Flancs/ Dessus/ Arrière: Aucun obstacle ne doit être 
placé dans les zones indiquées par les dimensions dans 
l’illustration.
Dessous: Posez l’appareil sur une surface plane et 
horizontale. Veillez à ce que sa ventilation correcte puisse 
se faire en le plaçant sur un support d’au moins dix 
centimètres de hauter.

1.
2.

3.

1.
2.

3.

Side view/Côté

Front view/Face

Microsoft and Windows Media are either registered 
trademarks or trademarks of Microsoft Corporation in 
the United States and/or other countries.
iPod is a trademark of Apple Inc., registered in the U.S. 
and other countries.
“Made for iPod” means that an electronic accessory 
has been designed to connect specifically to iPod and 
has been certified by the developer to meet Apple 
performance standards.
Apple is not responsible for the operation of this device 
or its compliance with safety and regulatory standards.

ENGLISH

Thank you for purchasing a JVC product.

LVT2130-002B [J, C, B, US, A, UX]

0910TMMMDWMTS

©2010 Victor Company of Japan, Limited

SLEEP 10

SLEEP 20

SLEEP 30

SLEEP 90

OFF

HBS

ROCK

POP

CLASSIC

JAZZ

File

Title

Artist

Album

Group

RD-N1
RD-N1W

For customer use:
Enter below the Model No. and Serial No. which are 
located either on the rear, bottom or side of the cabinet. 
Retain this information for future reference.

Model No.

Serial No.

For USA-California Only
This product contains a CR Coin Cell Lithium Battery 
which contains Perchlorate Material—special handling 
may apply. 
See www.dtsc.ca.gov/hazardouswaste/perchlorate

1

Sound Mode
To select the sound mode suitable for your favorite 
music.

Setting the clock
You can set the clock only when the System is turned 
off (on standby.)

If you have already set the clock before, press and 
hold CLOCK until the clock is flashing.

2  Adjust the hour and minute.

The clock may gain or lose 1 to 2 minutes per month. 
You may need to readjust the clock periodically.

Compatible iPod models

iPod model

Audio

iPod nano 

iPod nano (2nd Generation)

iPod nano (3rd Generation)

iPod nano (4th Generation)

iPod nano (5th Generation)

iPod mini

iPod mini (2nd Generation)

iPod (4th Generation)

iPod classic

iPod photo (4th Generation)

iPod video (5th Generation)

iPod touch

iPod touch (2nd Generation and Fall ‘09)

If iPod does not play correctly, update iPod software to the 
latest version.

For details about updating iPod, check on the Apple web 
site <http://www.apple.com>.

Maintenance
To get the best performance of the System, keep your discs 
and the mechanism clean.

Handling discs

Remove the disc from its case by holding it at the edge 
while pressing the center hole lightly.
Do not touch the shiny surface of the disc, or bend the 
disc.
Put the disc back in its case after use.
Be careful not to scratch the surface of the disc when 
placing it back in its case.
Avoid exposure to direct sunlight, temperature extremes, 
and moisture.

To clean the disc:
Wipe the disc with a soft cloth in a straight line from center 
to edge.

Cleaning the System

Stains should be wiped off with a soft cloth. If the System 
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe 
clean with a dry cloth.
Since the System may deteriorate in quality, become 
damaged or get its paint peeled off, be careful about the 
following:

DO NOT wipe it hard.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substances such as 
insecticides to it.
DO NOT allow any rubber or plastic to remain in contact 
for a long time.




CD PORTABLE SYSTEM

Prepare the remote control

When you use the remote control for the first time, pull out the insulation sheet.

To replace the battery in the remote control

Supplied accessories

After unpacking, check to make sure that you have all 
the following items:

Remote control (× 1)
Lithium coin battery CR2025 (× 1)

The battery has been installed in the remote 
control when shipped from the factory.

FM antenna (× 1)
AC plug adaptor (× 1) (Not supplied for USA, 
Canadian, European, Australian and Saudi Arabian 
models.)

If anything is missing, consult your dealer immediately.



Notes on the power cord

When you go away for an extended period of time, 
remove the plug from the wall outlet.
When unplugging the System from the wall outlet, 
always pull the plug, not the power cord.
Do not handle the power cord with wet hands.
Disconnect the power cord before cleaning the System or 
moving the System.
Do not alter, twist or pull the power cord, or put anything 
heavy on it, which may cause fire, electric shock, or other 
accidents.

Avoid moisture, water, dust, and high temperatures

Do not place the System in moist or dusty places.
If water gets inside the System, turn off the power and 
remove the plug from the wall outlet, then consult your 
dealer. Using the System in this state may cause a fire or 
electrical shock.
Do not expose the System to direct sunlight or place it 
near a heating device.



Lithium coin battery
(product number: CR2025)

NOTES:

Store the battery in a place where children cannot reach. If a child accidentally 
swallows the battery, consult a doctor immediately.
To prevent the battery from overheating, cracking, or starting a fire:

Do not recharge, short, disassemble or heat the battery or dispose of it in a 
fire.
Do not leave the battery with other metallic materials.
Wrap the battery with tape and insulate when throwing away or saving it.
Do not poke the battery with tweezers or similar tools.

Dispose of battery in the proper manner, according to federal, state, and local 
regulations.
The battery (battery pack or battery installed) shall not be exposed to excessive 
heat source such as sunshine, fire or the like.

CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same 
or equivalent type.



Getting started

For better FM reception
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna (not supplied) 
using a 75 Ω wire with coaxial type connector (IEC or DIN45325).

To a wall outlet

FM antenna (supplied): Extend it so that you can obtain the best reception.

NOTES:

Make sure the antenna conductors do not touch any other terminals, connecting cords 
or the power cord. Also, keep the antennas away from metallic parts of the System, 
connecting cords, and the AC power cord. Otherwise, it could cause poor reception.

Sound and other adjustments

Precautions

Connections  Do not connect the AC power cord until all other connections have been made.

In this manual...

The remote control buttons are used for explaining the 
operations unless mentioned otherwise. However, if the 
System has the same or similar button names, they can 
also be used for the operations.
“File” and “track” are used interchangeably.
All the illustrations of the display used as examples are 
from the European models.


Amplifier section
Output Power: 

6 W (3 W + 3 W) at 3 Ω (10% THD)

Audio Input: 

AUDIO IN: Stereo mini (ø 3.5 mm)

 

250 mV/47 kΩ

Digital input: 

USB MEMORY

Tuner
FM tuning range: 

87.50 MHz – 108.00 MHz

Disc player
Dynamic range: 

80 dB

Wow and flutter: 

Immeasurable

USB
USB specification: 

Compatible with USB 2.0 Full Speed

Compatible device: 

Mass storage class

Compatible system: 

FAT16, FAT32

Output power: 

DC 5 V 

 500 mA

iPod
Output power: 

DC 5 V 

 500 mA

General
Speaker type: 

Bass-Reflex type

Speaker unit: 

9 cm (3–9/16 inches) x 2

Speaker impedance: 

3 Ω

Power requirements: 

For USA and Canadian models 

AC 120 V / 60 Hz

For European models 

AC 230 V / 50 Hz

For Australian models 

AC 240 V / 50 Hz

For other models 

AC 110 V – 127 V / 220 V – 240 V

 

adjustable with voltage selector, 50/60 Hz

Power consumption: 

35 W (at operation)

 

1.00 W or less (on standby)

Dimensions (approx.): 

400 mm × 141 mm × 211 mm

 

(15–3/4 inches × 5–9/16 inches × 8–5/16 inches)

 

(W × H × D)

Mass (approx.): 

3.3 kg (7.3 lbs)

Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.

General
Power does not come on.

\  Power plug is not inserted securely. Plug it in securely.

Adjustments or settings are suddenly 
canceled before you finish.

\  There is a time limit. Start the procedure again.

Unable to operate the System from the 
remote control.

\  The path between the remote control and the remote sensor on the 

System is blocked.

\  The battery is exhausted.

No sound is heard.

\  Headphones are connected.

FM radio
Hard to listen to broadcasts because of 
noise.

\  Antenna connection is incorrect or loose.

\  The FM antenna is not properly extended and positioned.

\  Electrostatic discharge from your body may cause noise. If this 

happens, turn the System off then on again.

iPod
The iPod does not play, but “IPOD” 
appears on the display.

\  The iPod battery is low or exhausted. Charge the iPod battery.

Disc/USB
The disc/USB mass storage class device 
does not play.

\  The disc is placed upside down. Place the disc with the label side 

facing up.

\  The disc is recorded using “packet writing (UDF file system).” It cannot 

be played.

\  The USB mass storage class device is not connected properly.

“NO SONG” appears on the display.

\  MP3/WMA files are not recorded on the disc or USB mass storage class 

device.

ID3 Tag on an MP3 file cannot be shown.

\  There are two types of ID3 Tag—Version 1 and Version 2. This System 

can only show ID3 Tag Version 1.

Groups and tracks are not played back as 
you expect.

\  Playing order is determined when the groups and tracks are recorded. 

It depends on the writing application.

The disc/USB mass storage class device 
sound is discontinuous.

\  The disc is scratched or dirty.

\  MP3/WMA files have not been properly recorded onto the USB mass 

storage class device.

Sound from the USB mass storage class 
device is interrupted.

\  Noise and static electricity may stop the sound. In this case, disconnect 

and connect the USB mass storage class device again after turning off 
the System.

The disc tray does not open or close.

\  The AC power cord is not plugged in.

\  Disc ejection is prohibited. “DISC LOCKED” appears (see “Prohibiting 

disc ejection” in “Disc/USB” on page 2).

Recording
Unable to record onto a USB mass 
storage class device.

\  The capacity of the USB mass storage class device is full.

\  The USB mass storage class device is write-protected.

If the System does not work correctly, disconnect the AC power cord from the wall outlet, wait for a while, then 
connect the cord again.
JVC bears no responsibility for any loss of data in USB mass storage class device or iPod while using this System.

Initial settings

Playable disc/file types

This System can play back...

Audio CD and CD-R/CD-RW in Audio CD format
MP3/WMA files on a CD-R/CD-RW (ISO 9660 format) or 
USB mass storage class device (maximum data transfer 
rate: 2 Mbps)

This System cannot play “packet write” discs.
For MP3/WMA playback...

Some MP3/WMA files may not be played back due to 
their recording conditions.
This System can play only discs of ISO 9660 Level 1 or 
Level 2.
It is recommended to record each file at a sampling rate 
of 44.1 kHz and at a data transfer rate of 128 kbps.
This System can recognize a total of 999 tracks and 99 
groups.
This System can show the Tag data (version 1).

For playback of files on a USB mass storage class device...

You cannot play back files larger than 2 GB.
This System may not play back some USB mass storage 
class devices and does not support DRM (Digital Rights 
Management).




To check the current time while the System is turned 
on

The time is displayed for a few seconds.

If there is a power failure
The clock loses its settings. You need to set the clock 
again.

(Hold)

Display settings

Display information

To display ID3/WMA tag information

During playback of MP3/WMA...

ID3/WMA tag information is displayed automatically 
as follows:

Sleep Timer
You can set Sleep Timer only when the System is turned 
on.

1

2  Specify the time.

To check the remaining time until the System shuts 
off, press and hold CLOCK.

Timer

(Hold)

Sound adjustments

Fade muting
To drop the volume in a moment

To restore the volume, press again or adjust the 
volume.

Hyper Bass Sound (HBS)
To reinforce the bass sound

(Europe only)

Notes on installation

Select a place which is level, dry and neither too hot nor 
too cold—between 5˚C and 35˚C (41°F and 95 °F).
Do not install the System in a place subject to vibrations.
Do not put heavy objects on the System.

To prevent malfunction or damage to the System

Do not insert any metallic objects, such as wires, hairpins, 
coins, etc. into the System.
Do not block the vents.

There are no user-serviceable parts inside. If anything 
goes wrong, unplug the power cord and consult your 
dealer.


Supplied accessories
See “Supplied accessories” in “Getting started.”

Design and specifications are subject to change without 
notice.

Specifications

When you replace the battery, place the 
edge of the battery under the wire loop.

Wire loop

(No indication)

Canceled

INSTRUCTIONS

Canceled

Mains (AC) Line Instruction (Asia and Saudi Arabia only)

CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) line 
voltage corresponds with the position of the voltage selector 
switch provided on the outside of this equipment and, if 
different, reset the voltage selector switch, to prevent from a 
damage or risk of fire/electric shock.

If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
(Not supplied for USA, Canadian, European, Australian and Saudi Arabian models.)

EN_RDN1[JCBUSAUX]REV_B_2nd.indd   1

EN_RDN1[JCBUSAUX]REV_B_2nd.indd   1

10.7.28   0:56:57 PM

10.7.28   0:56:57 PM

Related Manuals for JVC JCV Micro HiFi System 0910TMMMDWMTS

0.579082s