JVC GET0622-001A User's Manual

JVC CD Player User's Manual - GET0622-001A.
Download
Page  of 62
4.8, 1232 votes
background image

1

1  Turn on the power.

 

KD-R218

CD RECEIVER : INSTRUCTIONS/INSTALLATION

1009DTSMDTJEIN
EN
© 2009 Victor Company of Japan, Limited

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to 
ensure your complete understanding and to obtain the best 
possible performance from the unit.

GET0622-001A

[J]

INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Caution:
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION:  Do not open the top cover. There are no user serviceable parts inside the unit; leave all 

servicing to qualified service personnel.

3. CAUTION:  (For U.S.A.) 

Visible and/or invisible class II laser radiation when open. Do not stare into beam.

   

(For Canada)  Visible and/or invisible class 1M laser radiation when open. Do not view directly 

with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

 

[European Union only]

Warning:
If you need to operate the unit while driving, be sure 
to look around carefully or you may be involved in a 
traffic accident.

For safety...
• Do not raise the volume level too much, as this will 

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated 

operations.

Temperature inside the car...
If you have parked the car for a long time in hot or 
cold weather, wait until the temperature in the car 
becomes normal before operating the unit.

Canceling the display demonstration 

4  Select <DEMO OFF>.

 

6  Finish the procedure.

 

Setting the clock 

Preparations 

For customer Use:
Enter below the Model No. and Serial No. which are located 
on the top or bottom of the cabinet. Retain this information 
for future reference.
Model No.
Serial No.

How to attach/detach the control 
panel

How to reset your unit

Reset the unit after installation is 
completed.
• Your preset adjustments will 

also be erased.

How to forcibly eject a disc

• You can forcibly eject the loaded disc even if the 

disc is locked. To lock/unlock the disc, see page 2.

• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.

Preparing the remote controller 
(RM-RK50)
When you use the remote controller for the first time, 
pull out the insulation sheet.

1  Turn on the power.

 

3  Select <CLOCK>.

 
4  Select <CLOCK SET>.

 

If the effectiveness of the remote controller 
decreases, replace the battery.

Replacing the lithium coin battery

CR2025

For USA-California Only:
This product contains a CR Coin Cell Lithium Battery 
which contains Perchlorate Material—special 
handling may apply. 
See www.dtsc.ca.gov/hazardouswaste/perchlorate

Caution:
• Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or equivalent 
type.

• Battery shall not be exposed to excessive heat such 

as sunshine, fire, or the like.

Warning (about battery handling)
To prevent accidents and damage:
• Do not install any battery other than CR2025 or its 

equivalent.

• Store out of reach of children.
• Do not recharge, short, or dismantle.
• Do not dispose of in fire.
• Do not carry around with other metallic materials.
• Wrap the battery with tape and insulate when 

throwing away or saving it.

5  Adjust the hour.

 
6  Adjust the minute.

 
7  Finish the procedure.

 

Basic operations 

When you press or hold the following button(s)...

Main unit

Remote 

controller

General operation

Turns on.
• When the power is on, pressing  /I/ATT on the remote controller 

also mutes the sound or pauses. Press  /I/ATT again to cancel 
muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.

Adjusts the volume level.

Selects items.

• Mutes the sound while listening to a source. If the source is “CD,” 

playback pauses. Press the control dial again to cancel muting or 
resume playback.

• Confirms selection.

Selects the sound mode.
• Enters tone level adjustment directly (see page 2) if pressed and held 

EQ BASS-TRE on the main unit.

Enters playback mode menu directly (see page 2).

(Initial setting)

[Hold]

(Initial setting)

[Hold]

[Hold]

Insulation sheet

Control dial

Loading slot

Remote sensor

•  DO NOT expose to bright sunlight.

Display window

Auxiliary input jack

Power off : Checks the current clock time
Power on : Changes the display information

Ejects the disc

Returns to the previous menu

Detaches the panel

EN_KD-R218[J]f.indd   1

10/21/09   12:15:37 PM

0.503923s