JVC 0409WMKMDWJMM User's Manual

JVC Stereo System User's Manual - 0409WMKMDWJMM.
Download
Page  of 2
4.2, 1918 votes
background image

1

2

5

6

3

4

7

8

ENGLISH

GVT0276-002A  EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up; 7th

GVT0276-002A  EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up; 7th

GVT0276-002A  EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up ; 7th

GVT0276-002A  EN_NX-D3DC3D5D7[US,UN,UG,UX,A,UW] Starting up; 7th

Troubleshooting 

Maintenance

Learning More about This System 

Precautions

Introduction

IMPORTANT: Before playing a disc/file, make sure of the 
following...
•  Turn on the TV and select an appropriate input mode on 

the TV to view the pictures or on-screen displays.

•  For disc/file playback, you can change the initial setting 

to your preference. Refer to “Setup Menu” in “Operating 
Guide.”

If “

” appears on the TV screen when you press a button, 

the disc/file cannot perform the operation you have tried 
to do. 

•  When playing a multi-channel encoded software, the 

System properly converts the multi-channel signals into 
2 channels, and emits the downmixed sound from the 
speakers. To enjoy the powerful sound of these multi-
channel encoded software, connect a proper decoder or an 
amplifier with a proper built-in decoder to the OPTICAL 
DIGITAL OUTPUT terminal on the rear.

About color system
This System accommodates both NTSC and PAL system and 
can play back discs/files recorded in either system.
To change the color system, see “Preparations.”

Note on Region Code
DVD players and DVDs have their own Region Code 
numbers. This System can play back only DVDs with an 
appropriate Region Code number. 
•  For details, see “Specifications.”
•  “REGION ERR” appears if DVD with a wrong Region Code 

is loaded.

  Ex.: For Southeast Asia

 

7 License and Trademark

•  “DVD Logo” is a trademark of DVD Format/Logo 

Licensing Corporation.

•  Manufactured under license from Dolby Laboratories. 

“Dolby” and the double-D symbol are trademarks of Dolby 
Laboratories.

•  Manufactured under license under U.S. Patent numbers: 

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and 
other U.S. and worldwide patents issued & pending. DTS 
and DTS 2.0 + Digital Out are registered trademarks and 
the DTS logos and Symbol are trademarks of DTS, Inc. 
© 1996-2007 DTS, Inc. All Rights Reserved.

 Playable Disc/File Types

 

•  CD-R/-RW: Recorded in the Audio CD, Video CD, and 

SVCD formats. MP3, WMA, WAV, JPEG, MPEG-1, 
MPEG-2, ASF, and DivX files written in accordance with 
the “ISO 9660” format can also be played.

•  DVD-R/-RW, +R/+RW: MP3, WMA, WAV, JPEG, 

MPEG-1, MPEG-2, ASF, and DivX files written in the 
UDF-Bridge format can be played.

•  DVD-R/-RW: Recorded in the DVD Video format and 

the DVD Video Recording (VR) format.

•  DVD+R: Recorded in the DVD Video format.

•  USB device: MP3, WMA, WAV, JPEG, MPEG-1, 

MPEG-2, ASF, and DivX* files.

In addition to the above discs/files, this System can play back 
audio data recorded on CD-Extra and CD-G (CD-Graphics). 
•  The following discs cannot be played back:
  DVD-RAM, CD-I (CD-I Ready), and Photo CD.
  Playing back these discs will generate noise and damage the 

speakers.

•  CD Text and DVD Text can be played, but text information 

will not be shown on the display. 

•  This System can play back Everio file with the extension 

code <.mod> recorded on DVD, CD*, and USB device*.

*  Only when the maximum bit rate is less than 2 Mbps. 

Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the 
“Compact Disc Digital Audio” standard. Therefore, the use of 
the Non-DVD side of a DualDisc in this product may not be 
recommended.

Warnings, Cautions and Others
CAUTION
The 

 button in any position does not disconnect the 

mains line.
Disconnect the mains plug to shut the power off completely 
(the STANDBY lamp goes off).
The MAINS plug or an appliance coupler is used as the 
disconnect device, the disconnect device shall remain readily 
operable.
•  When the System is on standby, the STANDBY lamp lights 

red.

•  When the System is turned on, the STANDBY lamp goes 

off.

The power can be remote controlled.

CAUTION:
To reduce the risk of electrical shocks, fire, etc.:
1.  Do not remove screws, covers or cabinet.
2.  Do not expose this appliance to rain or moisture.

CAUTION: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1.  Front: No obstructions and open spacing.
2.  Sides/Top/Back: No obstructions should be placed in the areas shown by the dimensions below.
3.  Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 

10 cm or more.

Front view

Side view

To get the best performance of the System, keep your discs 
and cassette tapes, and mechanism clean.

Handling Discs
•  Remove the disc from its case by holding it at the edge 

while pressing the center hole lightly.

•  Do not touch the shiny surface of the disc, or bend the 

disc.

•  Put the disc back in its case after use to prevent warping.
•  Be careful not to scratch the surface of the disc when 

placing it back in its case.

•  Avoid exposure to direct sunlight, extreme temperature, 

and moisture.

To clean the disc:
Wipe the disc with a soft cloth in a straight line from center 
to edge.

Handling Cassette Tapes
•  If the tape is loose in its cassette, take up the slack by 

inserting a pencil in one of the reels and rotate it.

  –  If the tape is loose, it may get stretched, cut, or caught in 

the cassette.

•  Be careful not to touch the tape surface.
•  Avoid the following places to store the tape—in dusty 

places, in direct sunlight or heat, in moist areas, on a TV 
or speaker, or near a magnet.

Cleaning the System
•  Stains should be wiped off with a soft cloth. If the System 

is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean 
with a dry cloth.

•  Since the System may deteriorate in quality, become 

damaged or get its paint peeled off, be careful about the 
following:

  –  DO NOT wipe it with a hard cloth.
  –  DO NOT wipe it forcefully.
  –  DO NOT wipe it with thinner or benzine.
  –  DO NOT apply any volatile substance such as 

insecticides to it.

  –  DO NOT allow any rubber or plastic to remain in 

contact for a long time.

Bluetooth Operations (NX-D7)

Sound of a Bluetooth audio player does not come out 
of the speakers. 
•  The Bluetooth indicator is on.

] Another player than the one you want to listen to is 

connected to the System. Change the device to be 
connected to the System (refer to “Using the Bluetooth 
Device (for NX-D7)” on page 30).

•  The Bluetooth indicator is flashing.

] Connection is not established. Try pairing again (refer to 

“Using the Bluetooth Device (for NX-D7)” on page 30).

•  The Bluetooth indicator is off.

] The Bluetooth adapter is not connected properly.

] “Bluetooth” is not selected as the source. 
Sound of the System does not come out of Bluetooth 
headphones.
•  The Bluetooth indicator is on.

] Another pair of headphones than the one you want to use 

is connected to the System. Change the headphones to be 
connected to the System (refer to “Using the Bluetooth 
Device (for NX-D7)” on page 30).

•  The Bluetooth indicator is flashing.

] Connection is not established. Try searching for the 

device (“SEARCH DV?”) again (refer to “Using the 
Bluetooth Device (for NX-D7)” on page 30).

•  The Bluetooth indicator is off.

] The Bluetooth adapter is not connected properly.

] The Bluetooth transmitter is not activated.
A Bluetooth device cannot be paired with the System. 

] Set the System ready to be paired.

] Input the right PIN code.

] Refer to the manual of the Bluetooth device for pairing. 
The sound quality is not good. 

] Change the SOUND QLTY setting to “HIGH” (refer to 

“Using the Bluetooth Device (for NX-D7)” on page 30).

The sound is discontinuous. 

] A wireless LAN or a microwave oven is interfering.

] Change the SOUND QLTY setting to “NORMAL” (refer 

to “Using the Bluetooth Device (for NX-D7)” on page 30).

GVT0276-002A[US/UN/UG/UX/A/UW]

0409WMKMDWJMM

©2009 Victor Company of Japan, Limited

COMPACT COMPONENT 
SYSTEM
NX-D7

NX-D5

NX-D3

NX-DC3

INSTRUCTIONS

CAUTION:
Battery shall not be exposed to excessive heat such as 
sunshine, fire, or the like.

CAUTION:
Excessive sound pressure from earphones or headphones 
can cause hearing loss.

IMPORTANT FOR LASER PRODUCTS
1.  CLASS 1 LASER PRODUCT
2.  CAUTION: Do not open the top cover or cabinet. There 

are no user serviceable parts inside the unit; leave all 
servicing to qualified service personnel.

3.  CAUTION: Visible and/or invisible class 1M laser 

radiation when open. Do not view directly with optical 
instruments.

4.  REPRODUCTION OF LABEL: CAUTION LABEL, 

PLACED INSIDE THE UNIT.

CAUTION:
•  Do not block the ventilation openings or holes. (If 

the ventilation openings or holes are blocked by a 
newspaper or cloth, etc., the heat may not be able to get 
out.)

•  Do not place any naked flame sources, such as lighted 

candles, on the apparatus.

•  When discarding batteries, environmental problems 

must be considered and local rules or laws governing 
the disposal of these batteries must be followed strictly.

•  Do not expose this apparatus to rain, moisture, dripping 

or splashing and that no objects filled with liquids, such 
as vases, shall be placed on the apparatus.

Notes on the power cord
•  When you are away on travel or otherwise for an extended 

period of time, remove the plug from the wall outlet.

•  When unplugging the System from the wall outlet, always 

pull the plug, not the power cord.

•  Do not handle the power cord with wet hands.
•  Disconnect the power cord before cleaning the System or 

moving the System.

•  Do not alter, twist or pull the power cord, or put anything 

heavy on it, which may cause fire, electric shock, or other 
accidents.

•  If the cord is damaged, consult a dealer and have the 

power cord replaced with a new one.

Avoid moisture, water, dust, and high temperatures
•  Do not place the System in moist or dusty places.
•  If water gets inside the System, turn off the power and 

remove the plug from the wall outlet, then consult your 
dealer. Using the System in this state may cause a fire or 
electrical shock.

•  Do not expose the System to direct sunlight or place it 

near a heating device.

Notes on installation
•  Select a place which is level, dry and neither too hot nor 

too cold—between 5˚C and 35˚C.

•  Do not install the System in a place subject to vibrations.
•  Do not put heavy objects on the System.
•  Do not drag or push the speakers on the floor or table; 

otherwise, the four feet at the bottom side of each speaker 
may peel off or drop from the speaker.

To prevent malfunction or damage of the System
•  Do not insert any metallic objects, such as wires, hairpins, 

coins, etc. into the System.

•  Do not block the vents.

There are no user-serviceable parts inside. If anything 
goes wrong, unplug the power cord and consult your 
dealer.

•  DivX® is a registered trademark of DivX, Inc., and is used 

under license.

•  ABOUT DIVX VIDEO: DivX® is a digital video format 

created by DivX, Inc. This is an official DivX Certified or 
DivX Ultra Certified device that plays DivX video.

•  ABOUT DIVX VIDEO-ON-DEMAND: This DivX® 

Certified device must be registered in order to play DivX 
Video-on-Demand (VOD) content. First generate the DivX 
VOD registration code for your device and submit it during 
the registration process. [Important: DivX VOD content 
is protected by a DivX DRM (Digital Rights Management) 
system that restricts playback to registered DivX Certified 
devices. If you try to play DivX VOD content not 
authorized for your device, the message “Authorization 
Error” will be displayed and your content will not play.] 
Learn more at www.divx.com/vod.

•  Plays DivX® video
•  Microsoft and Windows Media are either registered 

trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.

•  This product incorporates copyright protection technology 

that is protected by U.S. patents and other intellectual 
property rights. Use of this copyright protection technology 
must be authorized by Macrovision, and is intended for 
home and other limited viewing uses only unless otherwise 
authorized by Macrovision. Reverse engineering or 
disassembly is prohibited.

•  “CONSUMERS SHOULD NOTE THAT NOT ALL 

HIGH DEFINITION TELEVISION SETS ARE FULLY 
COMPATIBLE WITH THIS PRODUCT AND MAY 
CAUSE ARTIFACTS TO BE DISPLAYED IN THE 
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE 
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED 
THAT THE USER SWITCH THE CONNECTION 
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF 
THERE ARE QUESTIONS REGARDING OUR TV SET 
COMPATIBILITY WITH THIS MODEL 525p AND 625p 
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER 
SERVICE CENTER.”

•  USE OF THIS PRODUCT IN ANY MANNER THAT 

COMPLIES WITH THE MPEG-4 VISUAL STANDARD 
IS PROHIBITED, EXCEPT FOR USE BY A CONSUMER 
ENGAGING IN PERSONAL AND NON-COMMERCIAL 
ACTIVITIES.

•  HDMI, the HDMI logo and High-Definition Multimedia 

Interface are trademarks or registered trademarks of HDMI 
Licensing LLC.

•  HDCP is the abbreviation of “High-bandwidth Digital 

Content Protection,” and is the high-reliable copy control 
technology licensed by Digital Content Protection, LLC.

General

Adjustments or settings are suddenly canceled before 
you finish.

] There is a time limit. Repeat procedure again.
Operations are disabled.

] The built-in microprocessor may malfunction due to 

external electrical interference. Unplug the power cord and 
then plug it back in.

Unable to operate the System from the remote control.

] The path between the remote control and the remote 

sensor on the System is blocked.

] The batteries are exhausted.
No sound is heard.

] Speaker connections are incorrect or loose.

] Headphones are connected.
No picture appears on the TV screen.

] The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is 
blurred, or the picture is divided into two parts.

] The System is connected to a TV which does not support 

progressive video input.

] Incorrect scanning mode is selected (see “Preparations”).

] When you unplug the power cord and plug it back again, 

the scanning mode may change back to the initial setting 
(see “Preparations”).

The left and right edges of the picture are missing on 
the screen.

] Select “4:3 LB,” “4:3 MULTI LB” for “MONITOR TYPE” 

(refer to “Setup Menu” on page 20).

Radio Operations

Hard to hear broadcasts because of noise.

] Antenna connections are incorrect or loose.

] The AM loop antenna is too close to the System.

] The FM antenna is not properly extended and positioned.
Disc/USB Device Playback Operations

The disc does not play.

] You have inserted a disc whose Region Code is not correct. 

(“REGION ERR” appears on the display.)

] The disc is placed upside down. Place the disc with the 

label side facing up.

ID3 Tag on an MP3 file cannot be shown.

] Two types of ID3 Tag exist—Version 1 and Version 2. This 

System can only show ID3 Tag Version 1.

Groups and tracks are not played back as you expect.

] The playing order is determined when the groups 

and tracks were recorded. It depends on the writing 
application.

MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF or DivX 
files are not played back.

] The disc or the USB device may contain different types of 

files (ex. MP3/WMA/WAV/JPEG). In this case, you can 
only play back the files selected by pressing FILE TYPE.

] You have changed the “FILE TYPE” setting after the 

System read the disc or the USB device. In this case, reload 
the disc or disconnect the USB device and connect it again.

The disc sound is discontinuous.

] The disc is scratched or dirty.
No subtitle appears on the display though you have 
selected the initial subtitle language.

] Some DVDs are programmed not to display any subtitle 

initially. If this happens, press SUBTITLE after starting 
playback.

Audio language is different from the one you have 
selected as the initial audio language.

] Some DVDs are programmed to always use the original 

language initially. If this happens, press AUDIO/MPX after 
starting playback.

The disc tray does not open or close.

] The power cord is not plugged in.

] Child Lock is in use. “LOCKED” appears on the display 

(refer to “Listening to a Disc/USB Device” on page 17).

Recording Operations

Unable to record into the USB device. 

] The capacity of the USB device is full. Erase some tracks.

] You have recorded 999 tracks or group on the USB device 

you want to record into. Erase unwanted tracks.

] For NX-D5/NX-D3/NX-DC3: You cannot record tracks 

while Mic Mixing is activated.

] The USB device is write-protected.

] The connected USB device is incompatible to this System. 
Editing Operations

Unable to assign title to tracks on the USB device. 

] For NX-D5/NX-D3/NX-DC3: You cannot edit files while 

Mic Mixing is activated.

] When a track is damaged, you cannot edit that track. In 

this case, turn off the System and turn on again.

] The USB device is write-protected.
Timer Operations

Daily Timer does not work. 

] The System has been turned on when the on-time comes. 

Timer starts working only when the System is turned off.

Daily Timer does not start playback. 

] The loaded disc is a DVD Video. Change the disc. 

Connections
•  Make sure the antenna conductors do not touch any other 

terminals, connecting cords or the power cord. Also, keep 
the antennas away from metallic parts of the System, 
connecting cords, and the power cord. These could cause 
poor reception. 

•  Use only speakers with the same speaker impedance as 

indicated by the speaker terminals on the rear of the 
System.

•  The speakers are magnetically shielded to avoid color 

distortions on TVs. However, if not installed properly, 
it may cause color distortions. So, pay attention to the 
following when installing the speakers. 

  –  When placing the speakers near a TV set, turn off the 

TV’s main power switch or unplug it before installing the 
speakers. 
Then wait at least 30 minutes before turning on the TV’s 
main power switch again. 

  –  Some TVs may still be affected even though you have 

followed the above instructions. If this happens, move 
the speakers away from the TV. 

•  You cannot connect a computer and JVC Everio camcorder 

to the USB terminals of the System. 

•  Noise and static electricity may stop the USB device sound. 

In this case, disconnect and connect the USB device again 
after turning off the System. 

Preparations
To change the color system and scanning mode:
•  You cannot change the scanning mode to progressive in the 

following cases: 

  –  When your TV does not support the progressive video 

input. 

  –  When you have not connected your TV to the System 

using a component video cord or an HDMI cable.

Basic Operations
Setting the ECO (Ecology) Mode:
•  If you turn on the Daily Timer or the Recording Timer (for 

NX-D7) while the ECO mode is activated, the ECO mode 
is canceled. 

Listening to a Disc/USB Device

JVC bears no responsibility for any loss of data in the USB 
mass storage class device while using this System.

•  When connecting with a USB cable, use the USB 2.0 cable 

whose length is less than 1 m.

•  You can connect a USB device such as a USB flash memory 

device, hard disk drive, multimedia card reader, etc. to this 
System.

•  When you change the source to “DVD/CD” or “USB,” it 

may take a while to activate the source.

•  While the System is reading a disc, the source may not 

change to “USB1” or “USB2” properly. In this case, press 

7, 

then change the source to “USB1” or “USB2.”

•  On some discs, the actual operations may be different from 

what is explained in this manual due to the programming 
and disc structure; such differences are not a malfunction 
of this System.

•  The total number of tracks (files) that the System can detect 

is 4 000 for “DVD/CD” and “USB1,” and 2 000 for “USB2”.

•  The System recognizes up to...
  –  999 tracks (files) per group.
  –  99 groups per disc, “USB 1” (for NX-D7), and “USB” (for 

NX-D5/NX-D3/NX-DC3).

  –  999 groups per “USB 2.”
  Unplayable files are also counted in the total file number.
  Playable files which do not belong to any groups are 

recognized as files of group 1.

Program Play/Random Play/Group Play:
•  Program is cleared in the following cases:
  –  When the System is turned off (standby).
  –  For USB2 (NX-D7), when the source is changed to USB1.
•  While programming steps...
  –  Your entry will be ignored if you have tried to program 

an item number that does not exist (for example, 
selecting track 14 on a disc that only has 12 tracks).

  –  For MP3/WMA/WAV files, you can program up to 99 

files.

  –  You cannot select the 151st or later tracks.

Playing Repeatedly:
•  A-B Repeat cannot be used for MP3/WMA/WAV/JPEG/

MPEG-1/MPEG-2/ASF/DivX files and some DVDs.

To select the audio track:
•  On some discs/files, you cannot change audio language 

during playback.

Zoom:
•  While zoomed in, the picture may look coarse.

On-screen Operations
Operating the On-screen Bar:
•  A-B Repeat is available only within the same title/original 

program/track.

Setup Menu
General: 
•  If the upper and lower parts of the menu are cut off, adjust 

the picture size control of the TV. 

LANGUAGE menu:
•  When the language you have selected for “MENU 

LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE” is 
not recorded, the original language is used as the initial 
language. 

PICTURE menu—MONITOR TYPE:
•  Even if “4:3 PS,” “4:3 MULTI PS” is selected, the screen 

size may become 4:3 letter box while playing a disc/file. 
This depends on how the discs are recorded. 

•  When you select “16:9 NORMAL,” “16:9 MULTI 

NORMAL” or “16:9 AUTO,” “16:9 MULTI AUTO” for 
a picture whose aspect ratio is 4:3, the picture changes 
slightly due to the process of converting the picture width. 

OTHERS menu—ON SCREEN GUIDE:
•  The setup menu and on-screen bar will be displayed (and 

recorded) even if this function is set to “OFF.” Subtitles 
and the information for zoom-in always appear on the 
display regardless of this setting. 

Timer Operations
General:
•  When the System is on standby, you cannot set Daily 

Timer or Recording Timer (for NX-D7).

Setting the Clock:
•  “0:00” will flash on the display until you set the clock.
•  The clock may gain or lose 1 to 2 minutes per month. If 

this happens, reset the clock.

Setting the Daily Timer:
•  If you do not specify the preset station or track number 

correctly while setting a timer, the currently selected 
station or the first track will be played when the timer is 
activated. 

•  When you unplug the power cord or if a power failure 

occurs, the timer will be canceled. You need to set the 
clock first, then the timer again. 

•  If you set DVD Video as the source, Daily Timer will not 

work correctly. 

•  If you set the Sleep Timer after Daily Timer starts playing 

the selected source, Daily Timer is canceled. 

Listening to the Radio
•  If you store a new station into an occupied preset number, 

the previously stored station in that number will be erased. 

•  When you unplug the power cord or if a power failure 

occurs, the preset stations will be erased in a few days. If 
this happens, preset the stations again.

[European Union only]

Thank you for purchasing a JVC product.

CA-NXD7/CA-NXD5/
CA-NXD3/CA-NXDC3

Speaker 

system

Speaker 

system

CA-NXD7/CA-NXD5/
CA-NXD3/CA-NXDC3

Mains (AC) Line Instruction 
(Excluding Australian models)

CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) 
line voltage corresponds with the position of the voltage 
selector switch provided on the outside of this equipment 
and, if different, reset the voltage selector switch, to prevent 
from a damage or risk of fire/electric shock.
•  Use a screwdriver to slide the voltage selector to the 

correct voltage in the area you are plugging in the unit.

Listening to a Tape (for NX-DC3)
•  If you open the slide door on the top of the main unit 

during playback, the playback stops.

•  You cannot pause tape playback.

Sound & Picture Adjustments
Adjusting the Sound:
•  This function also affects the sound through the 

headphones. 

Setting My Sound (for DVD/CD and USB1):
•  My Sound setup is prohibited for certain file format. 
•  My Sound setup is prohibited during recording/editing or 

while Mic Mixing is activated.

Enjoying Karaoke
General:
•  You cannot enjoy all the Karaoke functions with DVD-

VR, video files and picture files.

•  While the System is turned on, connecting a microphone 

automatically activates Mic Mixing and all the Karaoke 
related functions.

•  While the System is turned off, connecting a microphone 

does not activate Mic Mixing and any other Karaoke 
related function. In this case, press MIC MIX after turning 
the System on. 

•  You cannot activate Mic Mixing during My Sound setup. 
•  While recording, connecting microphones does not 

automatically activate Mic Mixing.

Adjusting the Sound Track for Karaoke:
•  Vocal Masking is not applied to the optical digital output 

signals through the OPTICAL DIGITAL OUTPUT 
terminal. 

•  For some music files, Vocal Masking does not provide the 

correct effect.

Recording Operations
Recording from a Disc (for NX-D7):
•  When you press USB REC, “×1 ONLY” appears on the 

display in the following cases:

  –  While Program Play or Random Play is selected.
  –  When “HQ REC” is selected for the transfer rate.

Editing Operations
Editing Titles to Tracks or Groups: 
•  When a track is recorded, a title is automatically given to 

the track. When you want to give a new title to the track, 
delete the old title, then enter your desired title.

•  For NX-D5/NX-D3/NX-DC3, you cannot edit files while 

using Karaoke function.

(for NX-D7)

(for NX-D7/NX-D5)

GVT0276-002A

NX-D7/NX-D5/NX-D3/NX-DC3 INSTRUCTIONS—Starting 

up

— Consists of CA-NXD7, 

SP-NXD7F, and SP-NXD7W

— Consists of CA-NXD5, 

SP-NXD7F, and SP-NXD7W

— Consists of CA-NXD3 and 

SP-NXD3

— Consists of CA-NXDC3 

and SP-NXD3

The illustration above is for NX-D7.

0.704837s