Jonsered 2036 Workshop Manual | Page 8

Jonsered Chainsaws Workshop Manual - 2036.
Download
Page  of 126
4.8, 1787 votes
background image

8

Safety equipment

1

Dismantle the protective plate over the
guide bar attachment and the chain brake.

Release the chain brake!

Remove the plate clamp over the brake
spring and bend away the spring.

Remove the lock-ring round the hand
guard’s bearing pin and lift off the brake
mechanism.

Replace the plate insert in the hand guard
if the pins are worn by first pressing out
the fitted pin.

Remove the protective plate over the
guide bar attachment.

Remove the screws and lift off the chain
brake.

Release the chain brake!

! WARNING!

The brake spring is tensioned with a
very large force and can cause per-
sonal injury if the brake is not released
prior to further work.

Remove the screw and plate clamp over
the brake spring.

Carefully bend away the spring by means
of a screwdriver.

NOTE!

The spring has a certain tension even
when the brake is released, and  therefore
it should be dismantled carefully.

Remove the lock-ring round the hand
guard’s bearing pin and lift off the brake
mechanism.

If the pins on the plate insert in the hand
guard are worn the complete insert can
easily be replaced.

Press out the fitted pin with a suitable
mandrel and replace the insert.

 

0.530573s