JBL CSC2295H User's Manual

JBL Home Theater System User's Manual - CSC2295H.
Download
Page  of 1
4.6, 1008 votes
background image

CSC2295H

12” Two-Way System
Horizontal Configuration
90

O

x 90

O

Coverage Pattern

For Permanent Installation

Key Features:
4 2206H 12” VGC (Vented Gap

CooledTM LF transducer

4 2332 Optimized ApertureTM HF

horn with 1.5” throat

4 2447J 4” diaphragm, 1.5” throat

compression driver

4 Compact trapezoidal enclosure
4 DuraFlex finish - tough, weather

resistant and paintable

4 Tamper resistant internal Bi-

amp/Passive crossover selector

4 Advanced Network Topology for

smooth power response and sta-
ble amplifier loading

4 Versatile complement of suspen-

sion points

The CSC2295H is a JBL Custom
Shop produced adaptation of the
Sound Power series SP212-9. The
same transducers and switchable
passive/active crossover network
have been repackaged in a horizon-
tal configuration enclosure. All of the
features of the standard product
have been maintained while adding
installation flexibility.

The CSC2295H is available on a
build-to-order basis. Contact the
Custom Shop for information on
availability and lead time.

1Rating based on test signal of IEC filtered random noise
with a peak-to-average ratio of 6 dB, two hours duration.
2Sensitivity is based on a swept 500 Hz to 2.5 kHz test sig-
nal for an input of 2.83V @ 8 ohms.

JBL continually engages in research related to product
improvement.  Some materials, production methods and
design refinements are introduced into existing products
without notice as a routine expression of that philosophy.
For this reason, any current JBL product may differ in some
respect from its published description, but will always equal
or exceed the original design specifications unless other-
wise stated.

2/28/01 ATR

Preliminary Specifications:
System:

Frequency Range (-10 dB): 37 Hz - 20 kHz

Frequency Response (±3 dB): 60 Hz - 18 kHz

Horizontal Coverage Angle (-6 dB): 95° averaged 500 Hz to 16 kHz

Vertical Coverage Angle (-6 dB): 70° averaged 500 Hz to 16 kHz

Directivity Factor (Q): 9.0 averaged 500 Hz to 16 kHz

Directivity Index (DI): 9.0 dB averaged 500 Hz to 16 kHz

Sensitivity2: 95 dB SPL, 1W @ 1m (3.3 ft)

Calculated Maximum SPL2: 129 dB SPL, 1W @ 1m (3.3 ft)

Nominal Impedance: 8 ohms (Passive crossover mode)

Power Rating1: 600 watts IEC, 2400 watts peak

Recommended Amplifier Power: 800 watts

Recommended Controller: DSC260

Transducers:

Low Frequency: 2206H, 300 mm (12 in) dia., 100 mm (4 in) edge

wound ribbon voice coil

Nominal Impedance: 8 Ohms

Power Rating: 600 watts AES, 2400 watts peak

Sensitivity2: 95 dB SPL, 1W @ 1m (3.3 ft)

Calculated Maximum SPL2: 129 dB SPL, 1W @ 1m (3.3 ft)

Recommended Amplifier Power: 800 watts

High Frequency: 2447J; 100 mm (4”) diaphragm and voicecoil 

dia., 76 mm (1.5”) throat dia.; 2332 horn

Nominal Impedance: 16 Ohms

Input Power Rating: 75 W AES; 300 W Peak

Sensitivity2: 111 dB, 1 W @ 1 m (3.3’)

Calculated Maximum SPL: 136 dB @ 1 m (3.3’)

Recommended Amplifier: 200 W

Physical:

Enclosure: Trapezoidal, 15o top & bottom angles, 18 mm 

birch plywood

Environmental Specifications: Mil-Std 810, IPX4 per IEC 529

Suspension Attachment: 12 points, accept M10 threaded hardware

Finish: Black DuraFlex coating 

(white or custom color optional)

Grille: Black powder coated 18 gauge 

perforated steel grille with foam backing (white or
custom color optional)

Input Connector: 2 x NL4 Neutrik Speakon connector

Dimensions (H x W x D): 394 mm x 711 mm x 378 mm

(15.5 in x 28 in x 14.88 in)

Net Weight: 31.8 kg (70 lb)

Custom Shop

Rear

Top/Bottom

Front

28

15.5

Sides

14.88

30°

Related Manuals for JBL CSC2295H

0.578011s