Jabra Extreme 2 Owner's Manual | Page 8

7

english

Jabra EXTrEME2

tURnInG YoUR HeADset on AnD oFF
-    Slide the on/off button forward on the side of the headset to 

turn on the headset . The LED will flash green for a second when 

the headset is on .

-   Slide the on/off button backward to turn off the headset

pAIRInG It WItH YoUR pHone
Headsets are connected to phones using a procedure called 

‘pairing’ . by following a few simple steps, a phone can be paired 

with a headset in a matter of minutes . 
as described in the section Jabra VOICE GUIDaNCE above the 

pairing process is supported by voice prompts .
1.  Put the headset in pairing mode
-    When you turn on your Jabra EXTrEME2 for the first time, the 

headset will automatically start up in pairing mode – i .e . it is 

discoverable for your phone . When the headset is in pairing 

mode the LED is flashing blue .

2.  Set your Bluetooth® phone to ‘discover’ the Jabra 

EXTREME2

-    Follow your phone’s instruction guide . First make sure that 

bluetooth® is activated on your mobile phone . Then set your 

phone to discover the headset . This usually involves going 

to a ‘setup,’ ‘connect’ or ‘bluetooth®’ menu on your phone and 

selecting the option to ‘discover’ or ‘add’ a bluetooth® device .*

3.  Your phone will find the Jabra EXTREME2
-   Your phone will find the headset under name “Jabra 

EXTrEME2” . Your phone then asks if you want to pair with the 

headset . accept by pressing ‘Yes’ or ‘OK’ on the phone and 

confirm with the passkey or pIN = 0000 (4 zeros)  . Your phone 

will confirm when pairing is complete .

* phone dependent