ION Vinyl Forever Quick Start Guide | Page 4

ION Accessories Quick Start Guide - Vinyl Forever.
Download
Page  of 32
4.1, 2340 votes
background image

 

 
FEATURES 
 
1. USB CONNECTION – Use the included USB cable to 

connect VINYL FOREVER to your computer. The USB 
connection will provide power to the unit.  

2. LINE | PHONO SWITCH – Selects whether the input is 

set to receive a line level or phono level signal. Select 
‘LINE’ if using a CD player, MP3 player, tapedeck, mixer 
etc. Select ‘PHONO’ if you are using a turntable that 
does not have a preamp and its audio output is called 
‘phono’.     

3. GROUND CONNECTOR – Used to ground a turntable 

to the chassis. Use this only if your existing turntable 
already has a ground connector on it.  

4. RCA INPUT – RCA input for line level or phono level 

devices. 

5. HEADPHONE  OUTPUT  – Connect 1/8" stereo 

headphones here (optional, not included). You can also 
use your computer’s built-in laptop speakers or speakers 
attached to a computer tower. 

6. HEADPHONE  LEVEL    Adjust this to control the 

headphone volume. 

7. POWER  LED  – Indicates whether VINYL 

FOREVER is powered on or off.  

8. 

RECORDING LEVEL KNOB   Before 
recording through a USB connection, use 
this knob to adjust the recording gain. The 
level should be high enough so that the loudest part of the song does not distort or "clip".  
Refer to the EZ Vinyl/Tape Converter manual (PDF) on the included CD for more details on 
adjusting the recording level.  

1

2 3 4

5 6 7

8

Note: Carefully peel off the clear plastic 
backing to the sticker on the platter to see 
the full shine of the LP.  

Related Manuals for ION Vinyl Forever

0.604573s