ION Turntable Belt User's Guide

ION Accessories User's Guide - Turntable Belt.
Download
Page  of 2
4.2, 1938 votes
background image

 

 

 
ION Turntable Belt Replacement Guide 
 
To re-attach a turntable belt on your ION turntable, follow the procedure below:  
1.  Disconnect the power cable from the turnable.  

2.  Remove both the record, and the slipmat from the turntable.  

3.  There is a clip located over the middle of the spindle. You will need to remove 

this clip before you can take off the platter. A flathead screwdriver can be used 
to gently push the clip off the middle spindle.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

4.  Remove the platter by pulling it straight up, and over the spindle.  

5.  Place the platter upside down on a flat surface and position the belt so that it is 

wrapped around the underside of the platter’s inner ring, centered straight and 
free of any twists.  

 

 

 

 

 

 

 

 

Related Manuals for ION Turntable Belt

0.575872s