Intermatic MIL72 24-Hour Series Owner's Manual

Intermatic Misc Electronics Owner's Manual - MIL72 24-Hour Series.
Download
Page  of 2
4.5, 2438 votes
background image

MIL 72 Series

24-Hour and 7-Day Universal

Time Switches

APPLICATION
Time based control of lighting, ventilating, heating,

cooling or other electrical loads in commercial and

industrial applications. The MIL 72 time switches are

available with a 24-hour or 7-day program dial with a

single pole/double throw switch.
The MIL 72A series is intended for surface mounting.

The control is completely enclosed in a plastic housing

and includes a terminal cover and sub-base for

installation and hard wiring.
The MIL 72E is intended for flush (panel) mounting. All

units are supplied with a clear plastic cover.

TECHNICAL DATA
Supply Voltage:

Synchronous: 24, 120 and 240VAC,

 

 

                         60Hz models

Quartz: 24V AC/DC, 120 and

240VAC 50/60 Hz

Switch Type:

SPDT

Switch Rating:

21A @ 250VAC resistive
1350 W tungsten
1HP @ 120VAC
2HP @ 240VAC
16 FLA, 96 LRA, 120VAC ind.
12 FLA, 72 LRA, 240VAC ind.

Power
Consumption:

24V: 0.1VA; 120V: 0.5VA; 240V: 1.0VA

Ambient
Temperature Range: –40°F to 180°F, synchronous units

–14°F to 131°F, quartz units

Reserve Carryover: 150 hours for quartz units

Agency Approvals:    UL Recognized

INSTALLATION
To the installer:

1. Read operating instructions carefully.
2. Check the input and output ratings marked on the

unit to make sure this product is suitable for your

supply power and application.

3. Disconnect supply power prior to instal ation to

prevent electrical shock.

4. Wire in accordance with National and Local

electrical code requirements.

The MIL 72 time switch can be surface, flush or rail

mounted and is also available with an enclosure for

stand-alone applications.

SURFACE MOUNTING—MIL 72A
Remove dust-proof cover, loosen two screws on

opposite corners. Remove the housing that

surrounds the time switch and the terminal cover

away from the base.

Place screw through pre-set holes in base and

screw to back of panel or wall.
Wire in accordance with instructions. Depending

upon the specific installation, you may find it more

convenient to have wiring completed before

attaching the base. Replace terminal cover and

push timer firmly onto plug-in base. Now replace

housing and secure with screws.

NOTES:

• The MIL 72A may also be DIN rail mounted—

simply break out housing part that fits over rail on
each side.

• 24V quartz unit will operate on 6VDC, 12VDC, or

24VDC

MIL 72E

(Flush Mounting)

MIL 72A

(Surface Mounting)

Related Manuals for Intermatic MIL72 24-Hour Series

0.456166s