Ingersoll-Rand NIRVANA IRN37-160K-CC User's Manual | Page 20

Ingersoll-Rand Air Compressor User's Manual - NIRVANA IRN37-160K-CC.
Download
Page  of 100
4.7, 1668 votes
background image

IRN37 - 160K - CC & IRN50 - 200H -CC & IRN75 - 160K - 2S & IRN100 - 200H - 2S & IRN 250 - 300H - 2S

http://air.irco.com

1

6.0 RECEIPT / HANDLING

6.1 RECEIPT

When you receive the compressor please inspect it closely. Any indication of careless handling by the carrier should be 
noted on the delivery receipt especially if the compressor will not be immediately unpacked. Obtaining the deIivery 
persons signed agreement to any noted damages will facilitate any future insurance claims.

IMPORTANT

READ THIS 

LOST OR DAMAGED GOODS

THOROUGHLY INSPECT THIS SHIPMENT IMMEDIATELY UPON ARRIVAL

OUR RESPONSIBILITY FOR THIS SHIPMENT CEASED WHEN THE CARRIER SIGNED

BILL OF LADING

If goods are received short or in damaged condition, it is important that you notify the carrier and insist on  a

notation of the loss or damage across the face of the freight bill. Otherwise no claim can be enforced against the

transportation company.

If concealed loss or damage is discovered, notify your carrier at once and request an inspection. This is absolutely

necessary. Unless you do this the carrier will not entertain any claim for loss or damage. The agent will make an

inspection and grant a concealed damage notation. If you give the transportation company a clear receipt for

goods that have been damaged or lost in transit, you do so at your own risk and expense.

WE, AT lR, ARE WILLING TO ASSIST YOU IN EVERY POSSIBLE MANNER TO COLLECT CLAIMS FOR LOSS

OR DAMAGE, BUT THE WILLINGNESS ON OUR PART DOES NOT MAKE US RESPONSIBLE FOR

COLLECTION OF CLAIMS OR REPLACEMENT OF MATERIAL. THE ACTUAL FILING AND PROCESSING OF

THE CLAIM IS YOUR RESPONSIBILITY.

Ingersoll Rand Company

6.2 UNPACKING AND HANDLING

The compressor will normally be delivered with a polyethylene or other cover. If a knife has to be used to remove this 
cover, ensure that the exterior paintwork of the compressor is not damaged.

Incorporated within the base of the compressor are slots to enable a fork lift truck to move the machine. Ensure truck 
forks are fully engaged on both sides. Alternatively a special lifting frame can be utilized to enable a crane or hoist to 
move the compressor. Use only marked lifting points.

Once the packaging and pallet are discarded and the unit is in its final position, remove the transit brackets from the 
resilient mounts and store for future use or discard.

On N75−160 units remove the screw in the base and slide the separator tank service bracket into the upper position on 
the slots and tighten screws.

Related Manuals for Ingersoll-Rand NIRVANA IRN37-160K-CC

0.531032s