Ingersoll-Rand ARO PH10A-X-X User's Manual

Ingersoll-Rand Water Pumps User's Manual - ARO PH10A-X-X.
Download
Page  of 8
4.3, 1914 votes
background image

E

2010

CCN 99755480

 (800) 276-4658 D FAX (800) 266-7016

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET - BRYAN, OHIO 43506

OPERATOR’S MANUAL

PH10A-X-X

RELEASED:

7-7-00

REVISED:       10-15-10

(REV. M)

INCLUDING: OPERATION, INSTALLATION & SERVICE

1” HIGH PRESSURE DIAPHRAGM PUMP

3:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to “Model Description Chart” to match the pump material options.

637338 for air section repair (see page 6).

637339 for fluid section repair (models PH10A-XXX-XSX)(see page 4).

637339-1 for fluid section repair (models PH10A-XXX-XHX)(see page 4).

PUMP DATA

Models

see “Model Description Chart” for “-XXX”.

. . . . . . . . . . .

Pump Type

Metallic Air Operated, High Pressure,

. . . . . . . .

Double Diaphragm.

Material

see “Model Description Chart”.

. . . . . . . . . . .

Weight

94.73 lbs (42.97 kg)

. . . . . . . . . . . . . . . . . . . . . . . . .

Maximum Air Inlet Pressure

100 p.s.i. (6.9 bar)

. . . . . . . . .

Maximum Outlet Pressure

300 p.s.i. (20.4 bar)

. . . . . . . . . .

Maximum Flow Rate (flooded inlet)

26 g.p.m. (98.4 l.p.m.)

. . .

Maximum Particle Size

1/8” dia. (3.2 mm)

. . . . . . . . . . . .

Maximum Temperature Limits (diaphragm / ball / seal material)

Nitrile

10_ to 180_ F (-12_ to 82_ C)

. . . . . . . . . . . . . . . . .

PTFE

40_ to 225_ F (4_ to 107_ C)

. . . . . . . . . . . . . . . . .

Displacement / Cycle @ 100 p.s.i.

0.06 gal. (0.23 lit.)

. . . .

Dimensional Data

see page 8.

. . . . . . . . . . . . . . . .

Noise Level @ 70 p.s.i., 60 c.p.m.

84.5 db(A)j

. . . . .

j

The pump sound pressure levels published here have been updated to an Equivalent Continuous

Sound Level (LAeq)tomeettheintentofANSIS1.13-1971,CAGI-PNEUROPS5.1usingfourmicro-

phone locations.

NOTICE: All possible options are shown in the chart. However, certain

combinations may not be recommended, consult a representative or the

factory if you have questions concerning availability.

PH10A-XSS-XXT

1” DIAPHRAGM PUMP

Figure 1

MODEL DESCRIPTION CHART

PH10 A - X S S - X X T

Seat Material

H - Hard 440 Stainless Steel

S - 316 Stainless Steel
Ball Material

H - Hard 440 Stainless Steel

S - 316 Stainless Steel

Fluid Caps & Manifold Material

S - Stainless Steel

Fluid Connection

A - 1 - 11-1/2 N.P.T.F. - 1

B - Rp 1 (1 - 11 BSP parallel)

Diaphragm Material

T PTFE

Hardware Material

S - Stainless Steel

Center Section Material

A - Aluminum

www.ingersollrandproducts.com

Related Manuals for Ingersoll-Rand ARO PH10A-X-X

0.525008s