Ingenico EFT930G User's Manual | Page 8

Ingenico Payment Terminal User's Manual - EFT930G.
Download
Page  of 38
4.7, 1127 votes
background image

Page 7

Finally, the terminal will dial the Host computer to report the 
successful installation.

READY

Merchant Number

12345678

5.  Using the Terminal

Switching the Terminal On and Off

To SWITCH ON the terminal when it is off the base, press:

If on the base the terminal will always be powered.

To SWITCH OFF the terminal, press the yellow CLEAR button and    

 

at the same time

The Terminal Display

The terminal has a colour display and the icons in the banner at the top of the display use colour to 
indicate their status.

Signal Strength and
Assigned Base
This will indicate the signal 
strength (see section below 
‘Connection Information’)

Battery Charge Indicator
This will indicate the 
amount of battery charge 
(see section below 
‘Battery Information’)

Your terminal is supplied with a removable, rechargeable 
battery. This battery recharges when the terminal is 
connected to the charger unit.

Following installation, the battery charge status is 
indicated by the battery icon found in the top right hand 
corner of the terminal display.

When you charge the battery for the first time, it should be 
charged until full capacity is indicated. This may take from 
4 to 16 hours. New terminals are dispatched with some 
charge present. Transactions can be performed providing 
the terminal is connected to the charger unit so that it can 
continue charging.

READY

Merchant Number

12345678

Battery low

Battery fully 
charged (off base)

6.  Battery Information

One of these Battery Status Symbols will be displayed depending on the charge in the battery and 
whether the handset is on the Base.

If the terminal is on the base unit the battery symbol will display a power cord from the bottom of the 
battery.

Installation is now complete and the terminal will display the READY prompt. Your terminal is now 
ready for use. Check the date and time on your terminal, if this needs to be corrected refer to Section 
31 of this guide for details on how to do this.

 

0.510818s