Hunter 40352 Owner's Manual

Hunter Thermostats Owner's Manual - 40352.
Download
Page  of 2
4.6, 2308 votes
background image

LINE VOLTAGE THERMOSTAT MANUAL

Welcome to the Hunter Home Comfort family of quality products. The line voltage
thermostats are designed for operation with resistance heating elements and unit heaters.
These thermostats use snap action switches and do not require leveling. There are two
models: 40351 – single pole and 40352 – double pole. 
Removal and Installation:
WARNING: HIGH VOLTAGE – RISK OF ELECTRICAL SHOCK. Before removing
the existing thermostat and installing your Hunter thermostat, disconnect the power to the
furnace to avoid an electrical hazard. 
1) 
Before disconnecting your existing thermostat, make sure that you note and label how the
wires were connected to the thermostat.  2) Remove the existing thermostat.  3) Your Hunter
thermostat is made up of three sections: the baseplate, the cover, and the knob.  4) Connect
the wires from the wall to the baseplate screw terminals according to the connection diagrams
for each model. Connect the ground wire to the ground screw on the baseplate. 
Caution: Failure to connect the ground wire could result in electrical shock.  5) Attach the
baseplate to the box with the two screws provided.  6) Snap the cover onto the baseplate top
first then the bottom.  7) Place the knob on the switch and turn to the off position.  8) Restore
the power to the furnace.  9) Set the temperature by turning the knob to the desired temperature.
Technical Assistance:
For technical assistance and support, call our customer service department at 901-745-9222
between 8:00 a.m. to 5:00 p.m. Central Standard Time, Monday through Friday.

Hunter Fan Company, 2500 Frisco Ave., Memphis, TN 38114

Form # 41270 8/96

®

Also See for Hunter 40352

0.507627s