Humminbird 531870-1_A User's Manual

Humminbird Switch User's Manual - 531870-1_A.
Download
Page  of 4
4.5, 1072 votes
background image

Transducer Switch

1

531870-1_A

Thank You

Thank  you  for  choosing  Humminbird®,  America's  #1  name  in  fishfinders.  Humminbird®  has  built  its  reputation  by
designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird® accessories
offer the opportunity to upgrade and expand the capabilities of your Humminbird® product. 

Your  Humminbird®  accessory  is  designed  for  trouble-free  use  in  even  the  harshest  marine  environment. 
In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free
of  charge  during  the  first  year  after  purchase,  and  available  at  a  reasonable  rate  after  the  one-year  period.  For
complete details, see the Warranty section included in this manual. 

Contact our Customer Resource Center at 1-800-633-1468 or visit our Web site at humminbird.com.

Installation Overview

Following are instructions for the installation of this accessory. Before you start installation, we encourage you to read
these instructions carefully in order to get the full benefit from your Humminbird® accessory. If you find that any items
are missing from your installation kit, call our Customer Resource Center at 1-800-633-1468 or visit our Web site at
humminbird.com.

The  Transducer  Switch  comes  with  all  the  necessary  hardware  to  allow  you  to  connect  your  control  head  to  two
transducers.  The  transducers  may  be  the  same  type  of  transducer  with  different  mounting  locations,  or  you  can
maximize your unit’s performance by using two different transducers. The switch is intended for installation on the
console, and will work well on almost any boat. 

Supplies: In addition to the hardware supplied with your Transducer Switch, you will need a hand drill with various
size bits, a Phillips screwdriver, an adjustable wrench, and a 3 amp fuse.

Installation

Perform the procedures in the following sections to install the Transducer Switch on your boat. Before installing the
Transducer  Switch,  gather  all  the  parts  you  will  need,  and  make  sure  that  the  planned  location  of  the  Transducer
Switch will allow you to connect the two transducers to your control head. 

1. Locating the Transducer Switch Mounting Position
There are two ways to find the mounting location, as follows:

Switch Panel: If your console already contains a switch panel with an available slot, slide the Transducer Switch into
the designated slot until it snaps into place. Then skip ahead to procedure two.

In-Dash: If your console does not have a switch panel or a pre-made mounting location, you will need to create one
yourself. 

Mounting the Switch

Boat Console

Switch

© 2011 Humminbird®, Eufaula AL, USA.  

All rights reserved.

Transducer Switch

0.545745s