Huawei HG658 Owner's Manual | Page 10

Huawei Computer Parts Owner's Manual - HG658.
Download
Page  of 32
4.6, 1621 votes
background image

 
 

3 Setting Up a Wireless Connection 

If a wireless network adapter is installed on your computer, you can connect 
your computer to the HG658 over a wireless connection. 

 

The method for installing the wireless adapter and its driver varies 

by vendor. For details, see the installation guide provided by the 

vendor of your wireless adapter. 

The wireless network function is enabled on the HG658 before delivery. To 
check the function status, see section 5.3 "Enabling or Disabling the Wireless 
Network Function"

There are two methods for setting up a wireless connection between the 
HG658 and your computer. 

3.1 Setting up a Wireless Connection Using the 

WPS Button 

The HG658 supports the Wi-Fi Protected Setup (WPS) function in Push Button 
Configuration (PBC) mode. If your wireless network adapter also supports the 
WPS function, do the following to connect your computer to the HG658 over 
a wireless connection: 

Step 1  Press and hold the WPS button (on the HG658 side panel) for 1 or 

more seconds. 
The 

WLAN indicator light on the HG658 starts blinking, indicating that 

the HG658 is in the WPS negotiation state. 

Step 2  Enable the WPS negotiation function on the computer within 2 

minutes of the previous step. 
Wait until the HG658 

WLAN indicator light stops blinking and remains 

steady on. This indicates that a wireless connection is set up between 
the HG658 and the computer. 

0.504983s