Huawei HG612FTTC VDSL NTE User's Manual | Page 21

Huawei Water System User's Manual - HG612FTTC VDSL NTE.
Download
Page  of 58
4.2, 1589 votes
background image

EchoLife HG612 FTTC VDSL NTE 
User Guide 

3 Getting Started 

 

Issue 01 (2009-05-15) 

Huawei Proprietary and Confidential      

Copyright © Huawei Technologies Co., Ltd

3-3 

 

Step 2 

.168.1.1 in the address bar of the Internet Explorer, and then press 

Step 3  In th

box, enter the user name and the password, and then click OK

By d

Enter http://192
Enter

Login dialog 

efault, both the user name and the password are admin

 

By default, the IP address of the LAN interface of the HG612 is 192.168.1.1. You can change 
this IP address. 

After changing the IP address, ensure that the IP address of the computer is in the same 

 interface of the HG612 so that the 

To log in to the Web-based 

 IP address of the LAN interface of the HG612 

3.4 A

3.4.1 Configuring the ATM Route–PPPoA 
Step 1 

 PVC. 

e, choose Basic > ATM

ick Submit

Step 2  Set W

1.  I

ce drop-down list box. 

atm

hould be PPPoA. 

 list box. 

e and password provided by the ISP. 

d. 

Step 3 

s. 

1.  In the navigation tree, choose Basic > LAN

2.  Set the IP address and subnet mask of the HG612. 

3.  Select Enable for DHCP server, and then set the corresponding parameters. 

network segment as that of the IP address of the LAN
computer can access the Web-based configuration utility. 
configuration utility, you need to enter the new
in the address bar of the Internet Explorer. 

TM Mode Configuration 

Configure the ATM

1.  In the navigation tre

2.  Enter VPI/VCI provided by the ISP. 

3.  Set DSL link type to PPPoA

4.  Cl

AN parameters. 

n the navigation tree, choose Basic > WAN

2.  Select a PVC from the Layer2 interfa

Note 

z  The name of this PVC should begin wit

z  The DSL link type of this ATM PVC s

3.  Select Enable for WAN connection

4.  Select a service from the Service list drop-down

5.  Set Port binding to LAN1 or LAN2

6.  Select Enable for NAT as required

7.  Enter the user nam

8.  Select Enable for DHCP spoofing as require

9.  Select the authentication mode provided by the ISP

10. Select a dialing method, and then click Submit

Set LAN parameter

0.523135s