Huawei B593u-82 Quick Start Manual

Huawei Modems Quick Start Manual - B593u-82.
Download
Page  of 2
4.2, 1002 votes
background image

Thank You for Purchasing the LTE CPE! 
Generally, the LTE(Long Term Evolution) CPE(customer premises equipment) will be replaced 
by the CPE in this guide. 

Before You Begin 

Check the following items in the product package: 

Item 

Quantity 

LTE CPE 

1

Power adapter 

1

Ethernet cable 

1

USB cable 

1

Quick Start Guide 

1

External antenna(optional) 

2

Note: 
If you find anything missing or damaged, contact the supplier. 

Getting to Know the CPE 

Note: 
The figures in this guide are provided only for reference, see the actual product for details. 
If the problem persists, contact the local service provider. 
 

 

 

1

 POWER indicator 

z

 

On: The CPE is powered on. 

Note:  
Only when the POWER indicator is steady on for more than 60s, a major fault occurs. In 
this case, you need to contact the operator for repair. 
 
z

 

Off: The CPE is powered off. 

2

 WLAN indicator  

z

 

On: The WLAN function is enabled. 

z

 

Blinking: This indicator is blinking when data is transferred through the WLAN. 

z

 

Off: The WLAN function is disabled. 

3

 WPS indicator 

z

 

Regular blinking: Authentication for WPS accessing is implementing. The indicator blinks 
not more than two minutes. 

z

 

Irregular blinking: An event or alarm occurs. You need to log in to the WEB UI and 
perform related operations. 

z

 

On: The WPS function is enabled. 

z

 

Off: The WPS function is disabled. 

4

 TEL1/TEL2 indicator 

z

 

On: This indicator is on when the CPE of the calling or called party is in off-hook state. 

z

 

Blinking: This indicator blinks when the CPE is not switched to the off-hook state during 
a call. 

z

 

Off: This indicator is off when the CPE is hooked off and there is no calling party. 

5

 MODE indicator 

z

 

Blue:  

¾

 

This indicator is constantly blue when the CPE has accessed the LTE network but no 
data is transferred. 

¾

 

This indicator is blinking blue when the CPE has accessed the LTE network and data 
is transferred. 

z

 

White: This indicator is blinking white when the CPE is accessing the wireless network. 

z

 

Red: This indicator is constantly red when the CPE fails to access the wireless network or 
the CPE does not access the wireless network. 

z

 

Mulberry: This indicator is on when the SIM cannot be identified or the PIN is not 
entered or the PIN check fails. 

z

 

Off: This indicator is off when the CPE does not access the wireless network. 

6

 SIGNAL indicator 

z

 

On: This is a five-bar indicator. The more bars that are on, the stronger the wireless 
signals. 

z

 

Off: This indicator is off when no signal is detected. 

7

  SIM card slot 

This slot is for inserting the SIM card. 

8

 POWER button 

9

 USB port 

This port is for connecting the USB storage device or USB printer(optional). 
Note:  
This port is not for connecting the USB host device, such as a PC. 

10

 POWER port 

This port is for connecting to a power adapter. 

11

 USB port 

12

 TEL1/TEL2 ports 

These ports are connecting to telephones or faxes (optional). 

13

 LAN1–LAN4 ports 

These ports are for connecting to computers, switches, or other LAN devices. 

14

 LAN1–LAN4 indicators 

z

 

On: This indicator is on when an Ethernet device has been connected to the relevant 
port. 

z

 

Blinking: Data is being transmitted over the corresponding port. 

z

 

Off: This indicator is off when an Ethernet device is not connected to the relevant port. 

15

 WPS button 

When the WPS function is enabled, you can enable the WPS access function by holding 
down this button for more than 2 seconds. 

16

 RESET button 

z

 

You can restart the CPE by holding down this button for 2 to 5 seconds. 

z

 

You can restore the default settings of the CPE by holding down this button for more 
than 5 seconds. 

Note:  
Restoring the default settings of the CPE will override all the previous settings. 

17

 WLAN button 

You can enable or disable the WLAN function by holding down this button for more than 3 
seconds. 

1 2

3

10

7

8
9

11

12

13

14

16
17

15

4

5 6

18

0.583521s