1. Manuals
  2. Brands
  3. Huawei
  4. Huawei Computer Parts Manuals
  5. B593s-601 Quick Start Manual

Download Huawei B593s-601 Quick Start Manual for Free | Page 2

Download Computer Parts Quick Start Manual of Huawei B593s-601 for free from ManualAgent.
 Download
( 4, 41 Votes )
Page  of 2
B593s-601
○
7
USIM card slot
Accommodate a USIM card.
○
8
Power button
Press this button to power the CPE on or off.
○
9
Power port
Connect to the CPE's power adapter.
○
10
USB port
Connect to a USB storage device.
Note:
Only USB storage devices in FAT and FAT32 formats are supported.
This port cannot be connected to USB host devices, such as computers.
○
11
TEL port
Connect to telephones or a fax machine (optional).
Note:
Do not connect a telephone and fax machine to the CPE simultaneously.
○
12
LAN port
Connect to computers, switches, or other network devices.
○
13
LAN indicator
On: The port is connected to a device.
Blinking: Data is being transmitted through the port.
Off: No device is connected to the port.
○
14
WPS button
After the WPS function is enabled, press and hold this button for more than 0.5 seconds to
initiate WPS interconnection.
○
15
Reset button
Press and hold for more than 2 seconds to restore the CPE to its factory settings.
Note:
Restoring the default settings of the CPE will override all the previous settings.
○
16
WLAN button
Press and hold for more than 2 seconds to enable or disable the WLAN function.
○
17
External antenna port
Connect to an external antenna.
Note:
Do not power off the CPE during the upgrade. Otherwise, the CPE may be damaged.
Getting Started
Installing the USIM Card
Install the USIM card according to the illustration.
Note:
When removing the USIM card, gently press the USIM card in, then release. The
card will automatically pop out.
Do not remove the USIM card when it is in use. Doing so will affect the
performance of your CPE, and data stored on the USIM card may be lost.
Connecting to a Power Adapter
Install the power adapter according to the illustration.
Note:
Only use power adapters compatible with the CPE and provided by a designated
manufacturer. Use of an incompatible power adapter or one from an unknown
manufacturer may cause the CPE to malfunction, fail, or could even cause a fire.
Such use voids all warranties, whether expressed or implied, on the product.
The CPE's power adapter model is HW-120100XYW, HW-120200XYW,
HKA01212010-XY or HKA02412020-XY. X and Y represent letters or numbers that
vary by region. For details about the specific adapter model, contact an authorized
dealer.
Logging In to the Web Management Page
The web-based configuration utility can be used for initial CPE installation, parameter
configuration, and function management through the browser.
The Windows XP operating system and Internet Explorer 7.0 are used as an example.
Ensure that the CPE is connected to the computer. Follow these steps to log in to the web
management page:
1. Connect CPE cables.
2. Configure the computer's IP address so that the IP addresses of the computer and the
CPE are in the same network segment.
Note:
The CPE's default IP address is 192.168.1.1, the subnet mask is 255.255.255.0.
It is recommended that you use the automatically obtained IP addresses for the
computer and domain name system (DNS) server. If you manually configure the
computer IP address, you must set the DNS server IP address to the CPE's IP
address. Otherwise, you will fail to log in to the web management page.
3. Open the browser, and enter http://192.168.1.1 in the address box.
4. Enter the user name and password to log in to the web management page.
Note:
The default user name is admin.
The default password is admin.
LTE is a trademark of ETSI.
Version: V100R001_03 Part Number: 31010NJJ
12

Related Manuals for Huawei B593s-601