HP xb31 Digital Projector Quick Start Manual

HP Projectors Quick Start Manual - xb31 Digital Projector.
Download
Page  of 10
4.2, 1952 votes
background image

1

. lens cap

2

. power ON/OFF button

3

. lamp warning indicator light

4

. temperature warning indicator light

5

. source button

6

. menu ON/OFF button

7

. auto image button

8

. four directional select buttons

5

6

7

3

4

2

8

1

hp digital projector sb21

1

. power cord

2

. M1-A to VGA and USB

cable

3

. 2.5mm mini phone jack

for composite video

cable

4

. USB Mini-B 5-pin for

S-video input cable

5

. M1-D to DVI-D and USB

cable (optional)

6

. M1-A to HDTV/

component and USB

cable (optional)

powering the projector

1. Remove the lens cap.
2. Ensure that the power cord and signal

cable are securely connected.

3. Press the “POWER ON/OFF” button on the

control panel. The  startup screen will be

displayed for 30 seconds and the blue

POWER indicator light will light up.

4. Turn on your video source (computer,

notebook, video player, etc.). The projector

will detect your source automatically.

connecting the projector

1. Make sure the projector and your

computer are turned off.

2. Unplug the mouse from the computer.

3. Connect the projector signal cable to the

projector and to either the RGB or digital

port on the computer. Tighten the screws.

4. To enable the remote control’s mouse

features, connect the projector signal cable

USB 

connector to the computer.

5. Connect the projector to other video

sources.

6. Connect the power cord to the projector

and the power source.

7. Turn on the projector first and then the

computer.

video output

S-video output

digital tuner output

antenna

RGB

USB

DVI

3

4

1

6

5

2

! CAUTION!

Unplugging the projector

while the fan is running

may reduce lamp life.

0.502426s