HP Saw HP E4419B User's Manual | Page 141
HP4402.book : chapter3.fm 13 Fri Feb 12 15:32:45 1999
Menu Reference
Front Panel Menu Reference "Frequency/Cal Fac" Menu
HP E4419B User’s Guide
3-13
The softkey menu structured to this hardkey affects the channel setup.
Press this hardkey to access the “Frequency/Cal Fac” menu which allows
you to enter the frequency of the signal to be measured or the calibration
factor. Depending on the type of power sensor connected, and whether or
not a sensor calibration table or frequency dependent offset table is
selected, the text on some softkeys may appear grayed out. This indicates
that they are not relevant in the power meter’s current mode of operation.
Table 3-1 details the relevant softkeys in various modes of operation.
Table 3-1
•
Press this softkey to enter the frequency of the signal to be
measured on channel A, in the range of 0.001 MHz to
999.999 GHz. The default value is 50 MHz. Use the
,
,
and
hardkeys to change the frequency. To confirm your
choice press the appropriate frequency unit. Entering a frequency
using this softkey is only possible when you have a sensor
calibration table or frequency dependent offset table selected or
you are using an HP E-series power sensor.
Sensor
Model
Sensor Calibration Table
Selected
Sensor Calibration Table
Not Selected
Frequency
Cal Factor
Frequency
Cal Factor
HP 8480
series
power
sensors
Frequency can
be entered.
Default value
is 50 MHz.
The Cal Factor is
obtained from the
sensor calibration
table but can be
overridden by this
softkey.
Frequency can
be entered if a
frequency
dependent
offset table is
selected.
The Cal Factor can
be entered. Default
value is 100%.
HP E-series
power
sensors
Not Applicable
Not Applicable
Frequency can
be entered.
Default value
is 50 MHz.
The Cal Factor
cannot be entered, it
is obtained from the
EEPROM in the
power sensor.
Frequency
Cal Fac
A Freq
B Freq
A Cal Fac
B Cal Fac
A Freq
B Freq
A Cal Fac
B Cal Fac
A Freq
Related Manuals for HP Saw HP E4419B
-
Craftsman Saw 113.298032 Owner's Manual
48 pages
-
Dremel Saw 1671 Owner's Manual
16 pages
-
Elektra Beckum Saw BAS 316G DNB Operation Manual
16 pages
-
Elektra Beckum Saw BAS 315 User's Manual
4 pages
-
Makita Saw LS1013 User's Manual
36 pages
-
RIDGID Saw TS 2400 Operator's Manual
68 pages
-
SKIL Saw 5150 Instruction Manual
13 pages
-
Black & Decker Saw 7552 Instruction Manual
4 pages
-
Black & Decker Saw KS890E Instruction Manual
12 pages
-
Black & Decker Saw NAVIGATOR SC500G Instruction Manual
4 pages
-
Craftsman Saw 315.28461 User's Manual
48 pages
-
Craftsman Saw 113.244513 Owner's Manual
20 pages
-
Parkside Saw PDKS 120 User's Manual
13 pages
-
DeWalt Saw DW705 User's Manual
52 pages
-
Harbor Freight Tools Saw 45804 User's Manual
23 pages
-
RIDGID Saw TS3650 User's Manual
76 pages
-
Sears Saw 113.243311 User's Manual
32 pages
-
Adobe Saw Macromedia Flash 8 User's Manual
154 pages
-
METABO Saw KGT 501 User's Manual
16 pages
-
SKIL Saw 3385-01 User's Manual
56 pages
-
SKIL Saw HD77 User's Manual
40 pages
-
Partner Tech Saw K1200 User's Manual
7 pages
-
RIDGID Saw WTS2000L Operator's Manual
44 pages
-
Husky Saw THD750L Instruction Manual
18 pages