HP PSC 2510xi Photosmart All-in-One Printer Setup Poster

HP All in One Printer Setup Poster - PSC 2510xi Photosmart All-in-One Printer.
Download
Page  of 2
4.8, 2061 votes
background image

1-LINE

N

et

w

or

k (

W

ir

ed/W

ir

el

ess)  

Setup P

oster - Sid

e 1

  

hp

 p

sc 2

5

00 phot

o

smar

t s

er

ie

s all-in

-one    

Copyright Hewlett-Packard Company 2003 Printed in Germany. 

Wired/Wireless Network
Start Here - CHOOSE CORRECT POSTER

Connect power cords

Insert print cartridges

Place the cover over 
the top of the  
HP PSC. Make sure 
the buttons are 
visible. 

Firmly press down 
on all sides of the 
cover.

Remove tray and load plain white paper

Choose the one poster that 

Choose the one poster that 
matches your equipment.

matches your equipmen

If you have an existing  
Windows or Macintosh 

Windows or Macintosh 
Network

Networ  setup, follow this 
poster.

If you do not have a network, 
see the Direct Connect(USB) 
poster.

Attach cover and lift display

Turn on and set language  
and country/region 

Connect the power 
supply to the  
HP PSC, and then to 
the power cord. 
Plug into the wall.

Choose Wired or Wireless setup*

 

Match the network type to your 
existing network. 

If you do not have an existing 
network, set one up before 
attempting to connect the  
HP PSC.

Choose a or b, and then turn the 
poster over. 

Requirements:

Wired network

c

 Wireless network (infrastructure)

Align the print cartridges 

Wireless access point/ 
gateway/base station

Requirements:

1

2

3

4

You must connect one end of the 
supplied phone cord to the phone jack 
on the left (1-LINE) and the other end 
to a wall jack.

To connect an answering machine or 
use your own phone cord, see the 
Fax Setup chapter in the 
Reference Guide.    

6

8

7

b

a

9

Connect supplied phone cord

5

Wireless Information:
 
WPA - If your wireless network uses WPA, configure this on the  
HP PSC before you install the software. For details see the  
Reference Guide, chapter 15, Wireless Network Setup,  
use the embedded web server
.

Compatibility with 802.11g - This HP PSC includes an 802.11b
radio that is compatible on 802.11g systems.

Remove all items 
from the carton. 
Remove all tape 
and packaging 
from the  
HP PSC.  

ETHERNET (CAT-5) cable

W

indo

w

s/M

ac

intosh 

 

 

a

Q3

0

9

3-9

017

2

*Q3093-90172*

b

b

a

c

Lift display.

a

b

c

d

a

Wired Network

Wireless Network

b

c

a

b

Turn power on. 

Select your language, and then press 
OK. Select your country/region, and 
then press OK.

a

b

Press OK on the front panel to begin 
alignment. Wait a couple of minutes. 
After a page prints, alignment is 
complete. Discard or recycle this 
page. 

*If you have a different network 
setup, see the Reference Guide.

To set up with a USB cable, please 
see the other poster for a direct 
connection (install the software 
before connecting the USB cable).

Hold the black print cartridge with the label on top as 
shown. Slide the cartridge underneath the metal bar 
into the right (gray latch) side of the print carriage.

Hold the color print cartridge with the label on top 
as shown. Slide the cartridge into the left (blue 
latch) side of the print carriage.

Make sure both latches are 
locked into position. Close 
the door.

Pull the end of the gray latch 
toward you, press down until it 
stops, and then release. Make 
sure the latch catches below the 
bottom tabs. Repeat with the 
blue latch.

Remove the bright pink 
tape from both the print 
cartridges. Do not touch 
the gold-colored contacts 
or retape the cartridges.

Lift the print carriage door 
up until it catches. Lift the 
blue and gray latches.

ETHERNET (CAT-5) cable

a

b

c

d

Router/hub/switch

Go to step 10a to set up with a wired network.

Go to step 10b to set up with a wireless network.

Black

Tri-Color

e

f

*Q3093-90172*

Also See for HP PSC 2510xi Photosmart All-in-One Printer

Related Manuals for HP PSC 2510xi Photosmart All-in-One Printer

0.603700s