HP Officejet v40 All-in-One Printer Setup Poster

HP All in One Printer Setup Poster - Officejet v40 All-in-One Printer.
Download
Page  of 2
4.3, 2282 votes
background image

hp officejet v series setup poster

.

.

.

3

If the screen to the left does not
appear, go to the Windows taskbar,
click

, and then choose

.

In the Run dialog box, type

(substitute your

CD-ROM drive letter for the “d”),
and then click

.

Start

Run

d:\setup.exe

OK

c

a

Follow the onscreen
instructions. For more
information during
installation, click the
Help button, if available.

Connect the power adapter to the power
cord, and then plug into a power outlet.

8

Click

to begin.

Install

.

Turn your PC on. Wait for the

Windows desktop to appear,
and then insert the
HP OfficeJet CD.

Verify that you have these key
components.

4

Turn over to
continue.

Attach the front-panel cover. Make sure the cover
is even with the unit. Make sure all buttons are
accessible and can move freely.

9

1

2

3

5

c

1

Attach the automatic document feeder
(ADF) tray. Press the front edge of the
tray down to ensure it clicks into place.

i n v e n t

Insert the HP OfficeJet Installation CD first

Attach the cover

Attach the ADF tray

Load paper

Connect USB cable

Connect power

For additional setup information and
troubleshooting, refer to the Basic Guide.

*C8413-90171* *C8413-90171*

C8413-90171

Copyright Hewlett-Packard Company 2001.
Printed in the USA, Germany, or Singapore.

Connect the phone/fax cord to the
HP OfficeJet, and then to a wall jack.

To connect additional
equipment to the same phone
line, remove the plastic plug.
The diagram on the right
shows a possible
configuration.

If you connect a PC modem,
turn off its fax-receive feature.
See your Onscreen Guide for
information on tone versus
pulse dialing and phone
services.

Connect the phone cord

7

6

Connect additional equipment

power adapter

power cord

tray

phone cord

front-panel cover

Basic Guide
and warranty

print cartridges

CD

Make sure that you have completed
steps 1 and 2 before continuing.

Connect a high-speed USB cable from
your HP OfficeJet to a USB port on your
PC.

2

Finish copying files

When you see one of these
two screens, click

or

before

continuing to step 3.

Next

Restart

Follow the steps in order.

Remove all tape and packaging from the unit.

You must install
software first!

Side 1 of 2

Locked files found, Rebooting

Software Copied

Click Restart

Click Next

Important: You need to purchase
a high-speed USB cable to use
with your HP OfficeJet. Do not
connect the USB cable until
step 8.

Related Manuals for HP Officejet v40 All-in-One Printer

0.473537s