HP LaserJet 4MV Series User's Manual

HP Printers User's Manual - LaserJet 4MV Series.
Download
Page  of 4
4.6, 1685 votes
background image

 

 

 

 

 

800-551-1943 

 
HP LaserJet 4V | 4MV Series Maintenance Kit Instructions Page 1

 

 
LJ 4V | 4MV Series Maintenance Kit: 
1 HP RG5-1557 Fusing Assembly  
1 HP RF5-0302 Separation Pad  
1 HP RB1-1411 MP Pickup Roller  
1 HP RG5-1410 Transfer Roller  
2 HP RB1-1386 Dual Pickup Roller  
 
 
Please Note: Turn the printer off, unplug it, and allow it to sit for 30 minutes before 
performing these maintenance procedures.  
 
This printer maintenance kit provides you with the parts most commonly used to rebuild HP LaserJet 4V/4MV printers. 
Using the HP LaserJet Printer Maintenance Kit helps you eliminate repeat service calls and maximize the paper feed and 
print quality performance of your laser printer. 
 
Recommended Maintenance Level: 
The parts included in this kit have a variable service life that is highly dependent upon printer applications, operating 
environment, user maintenance and the print media used. Any printer servicing should include inspection of the 
components, particularly in the presence of error messages and/or image defects. 
 
Caution: Please be sure to refer to your printer service manual for detailed instructions 
on how to remove and replace these printer parts. 
 
Fusing assembly removal and replacement 
The Fusing assembly is located on the upper portion of the printer door. 
1). Remove the Transfer Roller 
Handle the Transfer Roller from the ends only. Do not touch the surface of the Transfer Roller. Skin oils will affect its 
electrical characteristics, resulting in poor image transfer. 
a). Grasp the shaft on either end of the Transfer Roller and lift upward to snap out of the plastic retainer clip (callout 1). 
b). Lift the opposite end up and out of its retainer clip. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

0.583844s