HP J7949E User's Manual | Page 189

HP Printers User's Manual - J7949E.
Download
Page  of 232
4.9, 1210 votes
background image

ENWW

HP Jetdirect Configuration Page 189

IPX/SPX Protocol Information

Information in this section of the Jetdirect configuration page is 
described in Table 9.5. For error messages, see Table 9.9.  

Table 9.5

IPX/SPX Configuration Information (1 of 2)

Message

Description

STATUS:

Indicates the current IPX/SPX protocol status.

READY: Indicates the HP Jetdirect print server is awaiting 
data over IPX/SPX.

DISABLED: Indicates that IPX/SPX was manually disabled.

INITIALIZING: Indicates that the print server is registering 
the node address or name. An additional status message 
may also be displayed.

An error code and message is displayed if the print server 
is not ready. For more information, see Table 9.9.

PRIMARY FRAME 
TYPE:

Specifies the frame type selection on the Jetdirect print 
server. 

AUTO SELECT: The print server automatically senses and 
limits the frame type to the first one detected.

EN_8023: Limits the frame type to IPX over IEEE 802.3 
frames. All others will be counted and discarded.

EN_II: Limits the frame type to IPX over Ethernet frames. 
All others will be counted and discarded. 

EN_8022: Limits the frame type to IPX over IEEE 802.2 with 
IEEE 802.3 frames. All others will be counted and 
discarded.

EN_SNAP: Limits the frame type to IPX over SNAP with 
IEEE 802.3 frames. All others will be counted and 
discarded.

0.546603s