HP Compaq Presario SR1010Z (PU166AV) CTO Desktop PC Setup Guide

HP Desktop PCs Setup Guide - Compaq Presario SR1010Z (PU166AV) CTO Desktop PC.
Download
Page  of 1
4.3, 1351 votes
background image

Your PC comes set up to produce sound through two 
speakers and, depending on the speakers you have, 
a subwoofer too. Some models may come set up for 
5.1 channel mode. 

If you have a 4, 6 (5.1 channel), 7 (6.1 channel), or 8 
(7.1 channel) speaker system, follow these steps to get 
proper sound from all speakers. 

Connect all speakers to the correct audio connectors on 
the subwoofer and the PC. 

Refer to the manufacturer’s documentation included with 
your speakers. 

Speaker Setup in 
Sound Blaster Audigy 2 ZS 

Click Start on the taskbar. 
Choose All ProgramsCreative, Sound Blaster 

Audigy 2 ZS, and then click Creative Speaker 
Settings

Select either 4/4.1 Speakers5.1 Speakers6.1 

Speakers, or 7.1 Speakers from the 
Speaker/Headphone Selection drop-down menu. 

Check the Digital Output Only box when using 

digital speakers (optional). 

Close the Speaker Settings window. 

 

Speaker Setup in 
InterVideo WinDVD 
You must complete the “Speaker Setup in Sound Blaster 
Audigy 2 ZS” procedure above before proceeding. 

Insert a DVD movie into the DVD-ROM drive. If the 

DVD starts playing automatically, skip to step 4. 

Click Start on the taskbar. 
Choose All ProgramsVideoInterVideo 

WinDVD Player, and then click InterVideo 
WinDVD 4

Right-click in the video window, and then click Setup

Select the Audio tab. 
Under Audio Speaker Configuration, if you have 

analog speakers, select either: 
•  4 channel (Front L/R and Surround L/R) 

•  6 channel (5.1 Home Theater) 

•  7 channel (6.1 Home Theater) 

•  8 channel (7.1 Home Theater) 
Or 
•  For digital speakers, select Digital (S/PDIF) out 

to External Processor

 

NOTE: 

If your system does not include a subwoofer, 

selecting the Send 0.1 (LFE subwoofer) to 
speaker/headphones
 box may enhance the low 
frequency range of sound. 

 

Click Apply, and then click OK

 

Now sound can be heard properly from all available 
speakers. 

Speaker Setup After 
System Recovery 
Refer to the section “System Recovery” of the printed 
documentation included with your PC. After a system 
recovery, you must reselect your speaker mode in 
the Sound Blaster Audigy 2 ZS program and in the 
InterVideo WinDVD program. 

Keep this information with your printed documentation 
for future reference. 

 

Speaker Setup for the Creative Sound Blaster 

Audigy 2 ZS Card 

Printed in 

 

Related Manuals for HP Compaq Presario SR1010Z (PU166AV) CTO Desktop PC

0.504203s