HP Compaq Presario 8000T-P8654M Desktop PC Installation Manual

HP Desktop PCs Installation Manual - Compaq Presario 8000T-P8654M Desktop PC.
Download
Page  of 2
4.2, 1603 votes
background image

system recovery 

réinstallation système 

— lea esto primero — 

restauración del sistema

 

 

System Recovery 

The system recovery CDs are licensed for use only with your 
specific PC model. 

The system recovery program offers two recovery options: 
Standard Recovery (non-destructive) or Full System Recovery. 

■ 

Standard Recovery: This is a non-destructive recovery, 
which recovers factory-shipped programs, drivers, and the 
operating system without affecting any data files that you 
may have created since purchasing this PC. Some data files 
may be difficult to find after the system recovery, so it is best 
to back up all hard disk files before performing a system 
recovery. 

■ 

Full System Recovery: This recovery function completely 
erases and reformats the hard disk. The program performs a 
full system recovery to reinstall the operating system, 
programs, and drivers from the recovery CDs. However, 
you must reinstall any software that was not installed on the 
computer at the factory. This includes software that came on 
the CDs included in the computer accessory box, and 
software programs you installed since your purchase. 

Note:  If your PC has a blank or corrupted hard disk, you can 

use only the full system recovery option. 

To run the system recovery program: 

If the computer works, you can back up all data files that 

you want to save onto removable media, such as CD-RW or 
diskette. Remove the backup CD or diskette you’ve made. 

Turn off the computer: 

■ 

If the computer works: Click Start on the taskbar, click 
Turn Off Computer, and then click Turn Off

Or 

■ 

Press and hold the On button approximately 5 seconds 
until the computer turns off. 

Disconnect all peripheral devices from the PC except the 

monitor, the keyboard, and the mouse. 

Press the On button to turn on the computer. 

When the color screen with the logo appears, press the F1 

key on the keyboard until Entering SETUP is displayed. (You 
only have a few seconds to press the F1 key before the 
normal startup process continues.) Wait until the BIOS setup 
program opens. 

Press the right arrow key to select Boot

Press the down arrow key to select Boot Device Priority, and 

then press Enter on the keyboard. 

Change the first boot device to CD-ROM using one of these 

methods: 

■ 

Press the down arrow key to select the CD-ROM item. 
Press the + (plus) key to move the CD-ROM item up until it 
is the first item in the list. 

Or 

■ 

Press the down arrow key to highlight the First Boot 
Device
 selection. Press the + (plus) key until CD-ROM is 
the selection. 

When installation is complete, you’ll return the BIOS to the 
original setting. 

Press the Eject button on the top CD-ROM drive, and wait 

for the tray to open. Insert the System Recovery CD #1 
and close the tray. 

10 Press the F10 key to save the changes and exit BIOS. 

11 With Yes selected, press Enter. 

12 The PC starts the recovery; wait for the onscreen instructions 

to display, and then follow those instructions: 

■ 

If your PC hard disk is blank or corrupted, press R to 
perform a full system recovery. Insert the remaining CDs 
when directed. 

Or 

■ 

For standard recovery, press R, and then press R again. 
Click Next to proceed with the non-destructive system 
recovery. Click Yes to start the recovery. Insert the 
remaining CDs when directed.  

Or 

■ 

For full system recovery, press R, and then press F. 
Click Yes to perform the full system recovery. Insert the 
remaining CDs when directed.  

When the recovery program finishes, click Restart to 
restart the computer. 

13 Before the computer restarts, the CD tray ejects. Remove 

the CD. 

14 Return the BIOS to the original setting. During the startup, 

when the color screen with the logo appears, press the F1 
key on the keyboard until Entering SETUP is displayed. (You 
only have a few seconds to press the F1 key before the 
normal startup process continues.) Wait until the BIOS setup 
program opens. 

15 Press the right arrow key to select Boot

16 Press the down arrow key to select Boot Device Priority, and 

then press Enter on the keyboard. 

17 Return the first boot device to the original setting using one 

of these methods: 

■ 

Press the down arrow key or up arrow key to select the 
CD-ROM item. Press the – (minus) key to move the 
CD-ROM item down until it is the third item in the list.  

Or 

■ 

Press the down arrow key to highlight the First Boot 
Device
 selection. Press the + (plus) key until Floppy is the 
selection. 

18 Press the F10 key to save the changes and exit BIOS. 

19 With Yes selected, press Enter. After the computer restarts, a 

series of startup screens appear. To proceed with the initial 
Microsoft Windows setup, you must answer a few 
questions. 

20 Complete the registration process, and then reconnect all 

peripheral devices. 

21 Reinstall software not originally installed on the computer by 

the factory. 

22 Copy data files you saved on the backup CD or diskette you 

made to your hard disk. 

Note:  If you have questions about the system recovery 

procedure, please contact Support; see your support 
documentation included with the computer 
documentation. 

Réinstallation système 

La licence des CD de réinstallation système n’est accordée que 
pour le modèle de ordinateur. 

Le programme Réinstallation système vous offre deux options 
de réinstallation : Réinstallation standard (non destructive) ou 
Réinstallation système complète. 

■ 

Réinstallation standard : Cette réinstallation non 
destructive
 réinstalle les programmes, les pilotes et le 
système d’exploitation qui ont été installés en usine sans 
affecter les fichiers de données créés depuis l’achat de 
l’ordinateur. Puisque certains fichiers de données peuvent 
être difficiles à retrouver après la réinstallation, il est 
préférable de copier tous les fichiers du disque dur avant 
d’exécuter la réinstallation. 

■ 

Réinstallation système complète : Cette fonction de 
réinstallation efface tout le contenu du disque dur et le 
reformate. Lorsque vous choisissez une réinstallation système 
complète, le programme réinstalle le système d’exploitation, 
les programmes et les pilotes à partir des CD de 
réinstallation. Vous devrez alors réinstaller tous les logiciels 
qui n’étaient pas préinstallés en usine, notamment les 
logiciels fournis sur des CD inclus dans la boîte 
d’accessoires de l’ordinateur et les logiciels que vous avez 
installés depuis l’achat de l’appareil. 

Remarque : Si le disque dur de votre ordinateur est vide ou 

endommagé, vous verrez seulement l’option de 
réinstallation système complète. 

Pour exécuter le programme de réinstallation système : 

Si l’ordinateur fonctionne, faites une copie de tous les 

fichiers de données que vous désirez conserver sur un 
support amovible, comme un CD réinscriptible ou des 
disquettes. Enlevez ensuite les disquettes ou le CD de 
sauvegarde. 

Éteignez l’ordinateur : 

■ 

Si l’ordinateur fonctionne : Cliquez sur le bouton 
démarrer de la barre de tâches, puis cliquez sur 
Arrêter l’ordinateur et sur Arrêter

— Ou — 

■ 

Enfoncez le bouton de mise en marche pendant environ 5 
secondes, jusqu’à ce que l’ordinateur s’arrête. 

Déconnectez tous les périphériques de l’ordinateur, sauf le 

moniteur, le clavier et la souris. 

Appuyez sur le bouton de mise en marche pour allumer 

l’ordinateur. 

Lorsque vous voyez apparaître l’écran coloré avec le logo, 

appuyez sur la touche F1 et maintenez-la enfoncée jusqu’à 
ce que Entering SETUP s’affiche (vous disposez seulement 
de quelques secondes pour appuyer sur F1 avant la 
poursuite du processus de démarrage). Attendez que le 
programme de configuration du BIOS s’ouvre. 

Appuyez sur la flèche vers la droite pour sélectionner Boot 

(Démarrer). 

Appuyez sur la flèche vers le bas pour sélectionner Boot 

Device Priority (Priorité dispositif d’amorçage), puis 
enfoncez la touche Entrée du clavier. 

 

Related Manuals for HP Compaq Presario 8000T-P8654M Desktop PC

0.585914s