HP Compaq LE2002xi 20-inch LCD Monitor with IWC Stand Reference Guide

HP Monitors Reference Guide - Compaq LE2002xi 20-inch LCD Monitor with IWC Stand.
Download
Page  of 2
4.2, 1015 votes
background image

Installing the HP Accessory Plate
for HP Advantage Series LCD Monitors with Integrated Work Center Stand

When assembling the monitor panel to an Integrated Work Center Stand, install the HP accessory plate to the rear of the monitor panel and then, at ach the 

Quick Release. The accessory plate will fil  the gap between the monitor and the quick release bracket to fit flush onto the rear of the monitor. The accessory 

plate is recommended for HP monitor models LA2006x, LA2206x, LA2206xc, and LA2306x that are installed on the integrated work center stand. 

Bij de montage van het monitorpaneel op een voet met geïntegreerd werkstation, moet u de tussenplaat van HP bevestigen aan de achterzijde van het 

monitorpaneel en vervolgens de snelle ontgrendeling aansluiten. De tussenplaat vult de ruimte tussen de monitor en de beugel voor snelle ontgrendeling 

zodat deze naadloos aansluit op de achterzijde van de monitor. De tussenplaat wordt aanbevolen voor de volgende modellen van HP: LA2006x, LA2206x, 

LA2206xc en LA2306x, indien deze geïnstal eerd worden op een voet met geïntegreerd werkstation. 

Lorsque vous assemblez le moniteur à un Support de centre de travail intégré, installez la plaque accessoire HP à l’arrière du moniteur puis, fixez le 

mécanisme de verrouillage rapide. La plaque accessoire comble l’écart entre le moniteur et le support du mécanisme de verrouillage rapide pour s’insérer 

sur la face arrière du moniteur. La plaque accessoire est recommandé pour les modèles de moniteur HP LA2006x, LA2206x, LA2206xc etLA2306x qui sont 

installés sur le Support de centre de travail intégré. 

Also See for HP Compaq LE2002xi 20-inch LCD Monitor with IWC Stand

0.587230s