HP 4100 mfp User's Manual | Page 147

HP All in One Printer User's Manual - 4100 mfp.
Download
Page  of 164
4.7, 2470 votes
background image

Installing a DIMM 145

Installing a DIMM

CAUTION
Static electricity can damage DIMMs. When handling DIMMs, 
either wear an antistatic wrist strap or frequently touch the 
surface of the DIMM’s antistatic package, and then touch bare 
metal on the product.

1

Print a menu map and configuration page before starting 
this procedure.

Note
This information will be used after installation to ensure that all 
stored values remain intact.

Press MENU until the INFORMATION menu appears.

Press the Down navigation button until PRINT MENU MAP 
appears.

Press 

 to print the page.

Repeat these steps to select and print the configuration 
page.

2

Turn the product off.

3

Unplug the power cord and disconnect any cables.

4

Remove the formatter cover by pulling it firmly toward the 
back of the product until the cover stops.

5

Remove the cover from the product.

6

Open the DIMM access door by pulling on the large metal 
tab.

7

If you are installing a new firmware DIMM, open the bottom 
DIMM slot, release the locks and remove the existing 
firmware DIMM. If you are adding a new font or memory 
DIMM, open any of the three upper DIMM slots.

8

Remove the new DIMM from the antistatic package. Hold 
the DIMM with your fingers against the side edges and your 
thumbs against the back edge. Align the notches on the 
DIMM with the DIMM slot. (Make sure that the locks on 
each side of the DIMM are open, or outward.)

9

Press the DIMM straight into the appropriate slot. Press 
firmly. Make sure that the locks on each side of the DIMM 
snap inward into place.

Continued on the next page.

4

5

9

8

6

7

Related Manuals for HP 4100 mfp

0.569793s