HP 1200w NFC/Wireless Mobile Print Accessory Installation Manual

HP Network Print Servers Installation Manual - 1200w NFC/Wireless Mobile Print Accessory.
Download
Page  of 2
4.6, 2070 votes
background image

ZZZKSFRPJR2-B

1

2

NFC/Wireless1200w Mobile Print Accy

Lea esto primero

www.hp.com/support

HP Officejet 100/150

HP LaserJet

Regulatory Model Identification Number
For regulatory identification purposes, this product is assigned 
a Regulatory Model Number (RMN). The RMN for your product is 
RSVLD-1302. The RMN should not be confused with the market-
ing model number (for example, HP 1200w Mobile Print Acces-
sory) or the HP product number (E5K46A).

Notice for the U.S.A.
This device complies with Part 15 of the Federal Communication 
Commission rules. Operation is subject to the following two con-
ditions: 1) this device may not cause harmful interference, and 
2) this device must accept any interference received, including 
interference that may cause undesired operation.

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a commercial environment. This 
equipment generates, uses and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause 
harmful interference, in which case the user will be required to 
correct the interference at this own expense. If this equipment 
does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by one or 
more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: The FCC requires the user to be notified that any 
changes or modifications made to this device that are not 
expressly approved by Hewlett-Packard Company may void the 
user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not cause 
harmful interference, and (2) this device must accept any interference 
received,including interference that may cause undesired operation.

Warning – Exposure to Radio Frequency Radiation Although the 
radiated output power of this device isbelow the FCC radio expo-
sure limits, the device should be used in such a manner that the 
potential for humancontact with the antennas during normal op-
eration is minimized. To avoid the possibility of exceeding theFCC 
radio frequency exposure limits, human proximity to the antenna 
should not be less than 20 cm(8 inches) during normal operation.

Notice for Canada
This device complies with the limits for a Class B digital device 
and conforms to Industry Canada standard ICES-003. Products 

that contain a radio transmitter comply with Industry Canada 
standard RSS210 and are labeled with an IC ID.

Operation is subject to the following two conditions: (1) this 
device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause 
undesired operation of the device.

This equipment complies with Canada radiation exposure limits 
set forth for an uncontrolled environment. This equipment 
should be installed and operated with a minimum distance of 20 
cm between the radiator and personnel.

Note pour le Canada
Cet appareil numérique de la classeBest conforme à la norme 
ICES-003 d’Industry Canada. La radio sans fil de ce dispositif 
est conforme à la certification RSS 210 d’Industry Canada et est 
étiquetée avec un numéro d’approbation IC.

Le fonctionnement est soumis aux deux conditions suivantes : 
(1) Cet appareil ne doit pas provoquer d’interférences et (2) doit 
accepter toute réception d’interférence, y compris les interférences 
susceptibles de générer un fonctionnement indésirable de l’appareil.

Cet équipement respecte les limites d’exposition aux radiof-
réquences canadiennes applicables dans un environnement non 
contrôlé. Cet équipement doit être installé et fonctionner à une 
distance minimale de 20 cm entre le radiateur et votre corps.

© 2013 Copyright Hewlett-Packard Development Company, L.P.

Reproduction, adaptation or translation without prior written permis-
sion is prohibited, except as allowed under the copyright laws.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in 
the ex press warranty statements accompanying such products 
and services.

Nothing herein should be construed as constituting an additional 
war ranty. HP shall not be liable for technical or editorial errors  
or omissions contained herein.

Reproduction, adaptation or translation without prior written permis-
sion is prohibited, except as allowed under the copyright laws.

La reproduction, l'adaptation ou la traduction de ce document sans 
l'autorisation écrite préalable de Hewlett-Packard est interdite, sauf 
dans des conditions conformes aux lois relatives au copyright. 

Les informations contenues dans ce document peuvent être modi-
fiées sans préavis.

Les seules garanties pour les produits et services HP sont décrites 
dans les déclarations de garantie expresse qui accompagnent ces 
produits et services. Les informations contenues dans ce document 
ne constituent en aucun cas une garantie supplémentaire. HP n'est 
pas responsable des erreurs d'ordre technique ou éditorial ou des 
omissions contenues dans ce document.

*5851-6060*

*5851-6060*
5HY%

www.hp.com

Related Manuals for HP 1200w NFC/Wireless Mobile Print Accessory