HP 110-016 Desktop PC (ENERGY STAR) User's Manual | Page 38

HP Desktop PCs User's Manual - 110-016 Desktop PC (ENERGY STAR).
Download
Page  of 65
4.1, 2180 votes
background image

Laser safety

For products equipped with optical drives or fiber optic transceivers.
This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic 

transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the 

standard IEC/EN 60825-1 and comply with its requirements.
Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies 

with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

WARNING! Use of controls or adjustments or performance of procedures other than those specified 

herein or in the laser product’s installation guide may result in hazardous radiation exposure. To 

reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside.

Do not operate controls, make adjustments, or perform procedures to the laser device other than 

those specified herein.

Allow only HP Authorized Service technicians to repair the unit.

Power supply and power cord set requirements
Power supply class I grounding requirements

For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the 

system power cord into an AC outlet that provides a ground connection. Substitute cords may not 

provide adequate fault protection. Only use the power cord supplied with this product or a Hewlett-

Packard authorized replacement.

Brazil notice

Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que 

possua aterramento (três pinos), conforme a norma nbr abnt 5410,visando a segurança dos usuários 

contra choques elétricos.

Denmark

Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.

Finland

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

Norway

Apparatet må tilkoples jordet stikkontakt.

Sweden

Apparaten skall anslutas till jordat uttag.

Power supply requirements

The power supplies on some products have external power switches. The voltage select switch 

feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts 

28 Chapter 4   Safety notices for desktops, thin clients and personal workstations

Related Manuals for HP 110-016 Desktop PC (ENERGY STAR)

0.529519s