Hotpoint WD63 User's Manual | Page 8

Hotpoint Washer/Dryer User's Manual - WD63.
Download
Page  of 12
4.9, 1748 votes
background image

Wash & Auto Dry Programme

Select required wash
programme (see STEP
4) by turning the wash
dial clockwise.

Sort laundry by label
into groups with the
same wash & dry
requirements, load
the appliance.
See Drying Weight
Load examples 
(STEP 6).

2

Close door by 
applying pressure at
the 2 o’clock position.

3

Select optional wash
feature (see STEP 5) by
pressing button.

4

Turn the drying dial to
select a suitable drying
time and temperature
for fabric type (see
chart, STEP 6).

6

Switch on both the
water and electricity
supply at the mains.

Press ‘ON’, the door
will lock and after a
few seconds the 
indicator light will 
illuminate and stay lit
throughout the wash
& dry programme.

1-2 minutes after 
completion of the
wash programme the
door locked indicator
light will go out and
the door can be
opened. Switch ‘OFF’
after use.

7

Add detergent and/or
fabric conditioner to
the dispenser drawer
(see STEP 3).

1

8

9

5

WARNINGS:
● Do not allow children

to play with the 
appliance or tamper 
with the controls.

● Do not overload the 

appliance!  It may 
damage laundry and 
reduce the quality of 
the wash.

● Do not attempt to open the 

door when water is visible in 
the drum or if the door locked
indicator light is lit.

● Do not use a dosing ball
to dispense detergent
when using a wash and
auto dry programme.

Drying Dial:

Rotate the dial in any direction
to the required heat setting /
drying time. During operation
the dial will slowly rotate
clockwise to the next OFF
position at which point the
drying cycle will end, after a
few seconds the door locked
indicator light will go out and
the door can be opened.

Variable Spin Speed Control Dial:

Only available on Model WD64

To reduce the maximum
programmed spin speed,
turn the dial before, or 
during a programme.
NOTE: The spin speed 
cannot be increased again
whilst the appliance is 
spinning.

Low Heat Setting

Fabric Type

High Heat Setting

Numbers
represent
drying time

End of
Programme

Start of
Programme

Pointer

STEP 7

0.519886s